lkml.org 
[lkml]   [2013]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch V5] drivers: power: Add support for bq24735 charger
On Mon, Oct 14, 2013 at 12:40:26PM -0600, Stephen Warren wrote:
> >>> diff --git a/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt
> >>
> >>> +Optional properties :
> >>
> >>> + - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
> >>> + presence.
> >>
> >> Is that actually a property of the BQ24735 chip itself (i.e. is it an
> >> output signal from the chip), or part of the board/system?
> >
> > The gpio itself is actually what the IRQ line is tied to from the
> > bq24735 -> tegra (in this case). In other words this is a Host GPIO that
> > is configured as an input and connected to the bq24735.
>
> Ok, so this is the ACOK output pin? In that case, it's fine. It might be
> worth mentioning that explicitly though.

I added the comment to the documentation and applied the patch with a
"Thanks-to: Stephen Warren <swarren@wwwdotorg.org>" tag. :)

Anton


\
 
 \ /
  Last update: 2013-10-26 01:41    [W:0.084 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site