lkml.org 
[lkml]   [2013]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5] PWM: atmel-pwm: add PWM controller driver
Hi All,

On 10/8/2013 21:17, Thierry Reding wrote:
> On Mon, Sep 30, 2013 at 05:10:40PM +0800, Bo Shen wrote:
>> Add Atmel PWM controller driver based on PWM framework.
>>
>> This is the basic function implementation of Atmel PWM controller.
>> It can work with PWM based led and backlight.
>>
>> Signed-off-by: Bo Shen <voice.shen@atmel.com>
>>
>> ---
>> Changes in v5:
>> - call clk_disable directly, if so, it won't cause more than one channel
>> enabled, the clock can not be disabled.
>>
>> Changes in v4:
>> - check the return value of clk_prepare()
>> - change channel register size as constant
>>
>> Changes in v3:
>> - change compatible string from "atmel,sama5-pwm" to "atmel,sama5d3-pwm"
>> - Add PWM led example in binding documentation
>> - Using micro replace hard code
>>
>> Changes in v2:
>> - Address the comments from Thierry Reding
>>
>> .../devicetree/bindings/pwm/atmel-pwm.txt | 41 +++
>> drivers/pwm/Kconfig | 9 +
>> drivers/pwm/Makefile | 1 +
>> drivers/pwm/pwm-atmel.c | 344 ++++++++++++++++++++
>> 4 files changed, 395 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pwm/atmel-pwm.txt
>> create mode 100644 drivers/pwm/pwm-atmel.c
>
> I haven't seen an Acked-by from the device tree bindings maintainers on
> this. I've Cc'ed them, so hopefully one of them has time to review.

Any comments?

Best Regards,
Bo Shen


\
 
 \ /
  Last update: 2013-10-22 12:41    [W:1.073 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site