Messages in this thread | | | Date | Tue, 22 Oct 2013 14:48:45 +0200 | From | Benoit Cousson <> | Subject | Re: [RFCv3 7/7] ARM: dts: N900: Add SSI information |
| |
Hi Sebastian,
Thanks to Tony, I've just realized that I missed all your patches, that for some reason ended-up in my junk folder :-(
That being said, I cannot apply any of your DTS patches! What base branch are you using?
Could you repost all your pending DTS patches in one series rebased on top of my for_3.13/dts?
Thanks, Benoit
On 06/10/2013 22:27, Sebastian Reichel wrote: > Add SSI device tree data for OMAP3 and Nokia N900. > > Signed-off-by: Sebastian Reichel <sre@debian.org> > --- > arch/arm/boot/dts/omap3-n900.dts | 12 ++++++++++ > arch/arm/boot/dts/omap3.dtsi | 47 ++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 59 insertions(+) > > diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts > index 0582356..0fbb77e 100644 > --- a/arch/arm/boot/dts/omap3-n900.dts > +++ b/arch/arm/boot/dts/omap3-n900.dts > @@ -186,6 +186,18 @@ > power = <50>; > }; > > +&ssi_port1 { > + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ > + > + ssi-char { > + compatible = "ssi-char"; > + }; > +}; > + > +&ssi_port2 { > + status = "disabled"; > +}; > + > &uart1 { > pinctrl-names = "default"; > pinctrl-0 = <&uart1_pins>; > diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi > index 7d95cda..9f60b82 100644 > --- a/arch/arm/boot/dts/omap3.dtsi > +++ b/arch/arm/boot/dts/omap3.dtsi > @@ -532,5 +532,52 @@ > num-eps = <16>; > ram-bits = <12>; > }; > + > + ssi: ssi-controller@48058000 { > + compatible = "ti,omap3-ssi"; > + ti,hwmods = "ssi"; > + > + reg = <0x48058000 0x1000>, > + <0x48059000 0x1000>; > + reg-names = "sys", > + "gdd"; > + > + interrupts = <71>; > + interrupt-names = "gdd_mpu"; > + > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + ssi_port1: ssi-port@0 { > + compatible = "ti,omap3-ssi-port"; > + > + reg = <0x4805a000 0x800>, > + <0x4805a800 0x800>; > + reg-names = "tx", > + "rx"; > + > + interrupt-parent = <&intc>; > + interrupts = <67>, > + <68>; > + interrupt-names = "mpu_irq0", > + "mpu_irq1"; > + }; > + > + ssi_port2: ssi-port@1 { > + compatible = "ti,omap3-ssi-port"; > + > + reg = <0x4805b000 0x800>, > + <0x4805b800 0x800>; > + reg-names = "tx", > + "rx"; > + > + interrupt-parent = <&intc>; > + interrupts = <69>, > + <70>; > + interrupt-names = "mpu_irq0", > + "mpu_irq1"; > + }; > + }; > }; > }; >
-- Benoît Cousson BayLibre Embedded Linux Technology Lab www.baylibre.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |