lkml.org 
[lkml]   [2013]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[RFC][PATCH v5 14/14] cpuidle: set the current wake up latency
    Date
    Save the current wake up latency of a core. This latency is not always
    the latency of a defined c-state but can also be an intermediate value
    when a core is ready to shutdown (timer migration, cache flush ...) but
    wait for the last core of the cluster to finalize the cluster power down.
    This latter use case is not manage by the current version of the patch because
    it implies that the cpuidle drivers set the wake up latency instead of the
    cpuidle core.

    Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>

    Conflicts:

    drivers/cpuidle/cpuidle.c
    ---
    drivers/cpuidle/cpuidle.c | 11 +++++++++++
    1 file changed, 11 insertions(+)

    diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
    index d75040d..7b6553b 100644
    --- a/drivers/cpuidle/cpuidle.c
    +++ b/drivers/cpuidle/cpuidle.c
    @@ -19,6 +19,7 @@
    #include <linux/ktime.h>
    #include <linux/hrtimer.h>
    #include <linux/module.h>
    +#include <linux/sched.h>
    #include <trace/events/power.h>

    #include "cpuidle.h"
    @@ -42,6 +43,12 @@ void disable_cpuidle(void)
    off = 1;
    }

    +static void cpuidle_set_current_state(int cpu, int latency)
    +{
    + struct sched_pm *stat = &per_cpu(sched_stat, cpu);
    +
    + atomic_set(&(stat->wake_latency), latency);
    +}
    /**
    * cpuidle_play_dead - cpu off-lining
    *
    @@ -79,12 +86,16 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv,
    ktime_t time_start, time_end;
    s64 diff;

    + cpuidle_set_current_state(dev->cpu, target_state->exit_latency);
    +
    time_start = ktime_get();

    entered_state = target_state->enter(dev, drv, index);

    time_end = ktime_get();

    + cpuidle_set_current_state(dev->cpu, 0);
    +
    local_irq_enable();

    diff = ktime_to_us(ktime_sub(time_end, time_start));
    --
    1.7.9.5


    \
     
     \ /
      Last update: 2013-10-18 16:21    [W:4.807 / U:0.436 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site