lkml.org 
[lkml]   [2013]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RESEND PATCH 3/4] ARM: dts: bcm281xx: Add i2c busses
From
Hi Tim,
This patch does not work as it relies on the yet-unmerged clock code
for bcm11351. This patch does not apply to -rc, and when tweaked it
does not compile as it references non-existent bsc_clks.
Has the clk patches been submitted yet ? Applying this will have to
wait until those have been accepted.

thanks,
csd


On Wed, Oct 16, 2013 at 3:01 PM, Tim Kryger <tim.kryger@linaro.org> wrote:
> Add the DTS nodes for all the i2c busses in the SoC.
>
> Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
> Reviewed-by: Christian Daudt <csd@broadcom.com>
> Reviewed-by: Matt Porter <matt.porter@linaro.org>
> Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
> ---
> arch/arm/boot/dts/bcm11351.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
> index 1246885..4bfd7e3 100644
> --- a/arch/arm/boot/dts/bcm11351.dtsi
> +++ b/arch/arm/boot/dts/bcm11351.dtsi
> @@ -146,6 +146,46 @@
> status = "disabled";
> };
>
> + i2c@3e016000 {
> + compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> + reg = <0x3e016000 0x80>;
> + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&bsc1_clk>;
> + status = "disabled";
> + };
> +
> + i2c@3e017000 {
> + compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> + reg = <0x3e017000 0x80>;
> + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&bsc2_clk>;
> + status = "disabled";
> + };
> +
> + i2c@3e018000 {
> + compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> + reg = <0x3e018000 0x80>;
> + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&bsc3_clk>;
> + status = "disabled";
> + };
> +
> + i2c@3500d000 {
> + compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> + reg = <0x3500d000 0x80>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&pmu_bsc_clk>;
> + status = "disabled";
> + };
> +
> clocks {
> bsc1_clk: bsc1 {
> compatible = "fixed-clock";
> --
> 1.8.0.1
>
>


\
 
 \ /
  Last update: 2013-10-17 07:21    [W:0.101 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site