lkml.org 
[lkml]   [2013]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/7] Documentation: dt bindings: move ..usb/usb-phy.txt to ..phy/ti-phy.txt
Date
Since now we have a separate folder for phy, move the PHY dt binding
documentation of TI to that folder.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/{usb/usb-phy.txt => phy/ti-phy.txt} | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
rename Documentation/devicetree/bindings/{usb/usb-phy.txt => phy/ti-phy.txt} (86%)

diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
similarity index 86%
rename from Documentation/devicetree/bindings/usb/usb-phy.txt
rename to Documentation/devicetree/bindings/phy/ti-phy.txt
index c0245c8..355acf0 100644
--- a/Documentation/devicetree/bindings/usb/usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -1,4 +1,4 @@
-USB PHY
+TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs

OMAP USB2 PHY

@@ -21,10 +21,11 @@ usb2phy@4a0ad080 {
#phy-cells = <0>;
};

-OMAP USB3 PHY
+TI PIPE3 PHY

Required properties:
- - compatible: Should be "ti,omap-usb3"
+ - compatible: Should be "ti,phy-usb3", "ti,phy-pcie" or "ti,phy-sata".
+ "ti,omap-usb3" is deprecated.
- reg : Address and length of the register set for the device.
- reg-names: The names of the register addresses corresponding to the registers
filled in "reg".
@@ -38,7 +39,7 @@ Optional properties:
This is usually a subnode of ocp2scp to which it is connected.

usb3phy@4a084400 {
- compatible = "ti,omap-usb3";
+ compatible = "ti,phy-usb3";
reg = <0x4a084400 0x80>,
<0x4a084800 0x64>,
<0x4a084c00 0x40>;
--
1.7.10.4


\
 
 \ /
  Last update: 2013-10-15 22:41    [W:1.280 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site