lkml.org 
[lkml]   [2013]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] Exynos 5410 Dual cluster support
Date
The series of patches represent support of Exynos 5410 SoC

The Exynos 5410 is the first Samsung SoC based on bigLITTLE architecture.
Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same time

Patches add new platform description, support of clock controller,
dual cluster support and device tree for Exynos 5410

Has been build on v3.12-rc5.
Has been tested on Exynos 5410 reference board (exynos_defconfig).

Thanks,
Vyacheslav.


Changelog:

v2:
In drivers/clk/samsung/clk-exynos5410.c
1. Clock driver converted to use preprocessor macros instead of enums.
Clock IDs now defined in include/dt-bindings/clock/exynos5410.h.
2. Unused spinlock removed.
3. Function exynos5410_clk_init defined as static.
Struct exynos5410_fixed_rate_ext_clks defined as static.
Struct exynos5410_mux_clks defined as static.
Struct exynos5410_div_clks defined as static.
Struct exynos5410_gate_clks defined as static.
4. Removed aliases.
5. Pll's magic register offsets defined as preprocessor macros.
6. Redundant check of device_node pointer removed.

In arch/arm/boot/dts/exynos5410.dtsi
1. dwmmcX nodes renamed to mmc.
dwmmc_X renamed to mmc_X.
dwmmc status="disabled" field added.
fifo-depth field moved from arch/arm/boot/dts/exynos5410-smdk5410.dts
2. Blank lines added where necessary.
3. cpu@ suffixes corrected.
4. edcs node removed.
5. Hexadecimal characters case corrected.
6. Clock IDs replaced with preprocessor macros.

In arch/arm/boot/dts/exynos5410-smdk5410.dts
1. status = "okay" field added to mmc nodes.

In arch/arm/mach-exynos/edcs.c
1. "kfs_" prefix replaced with "edcs_"
2. EDCS_CPUS_PER_CLUSTER and EDCS_CLUSTERS defined instead of MCPM's values.
3. Cache handling sequence borrowed from arch/arm/mach-vexpress/tc2_pm.c
4. mcpm_sync_init() call added.
5. power management functions reworked.

Other
1. Documentation/devicetree/bindings/clock/exynos5410-clock.txt corrected.
2. Removed smdk5410_defconfig. Instead SOC_EXYNOS5410 now selects MCPM and
ARM_CCI in arch/arm/mach-exynos/Kconfig.
3. edcs_status driver removed.

Tarek Dakhran (4):
ARM: EXYNOS: Add support for EXYNOS5410 SoC
clk: exynos5410: register clocks using common clock framework
ARM: EXYNOS: add Exynos Dual Cluster Support
ARM: dts: Add initial device tree support for EXYNOS5410

.../devicetree/bindings/clock/exynos5410-clock.txt | 37 +++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5410-smdk5410.dts | 65 +++++
arch/arm/boot/dts/exynos5410.dtsi | 209 ++++++++++++++++
arch/arm/mach-exynos/Kconfig | 12 +
arch/arm/mach-exynos/Makefile | 2 +
arch/arm/mach-exynos/common.c | 18 ++
arch/arm/mach-exynos/edcs.c | 270 +++++++++++++++++++++
arch/arm/mach-exynos/include/mach/map.h | 1 +
arch/arm/mach-exynos/mach-exynos5-dt.c | 1 +
arch/arm/plat-samsung/include/plat/cpu.h | 8 +
drivers/clk/samsung/Makefile | 1 +
drivers/clk/samsung/clk-exynos5410.c | 251 +++++++++++++++++++
include/dt-bindings/clock/exynos5410.h | 175 +++++++++++++
14 files changed, 1051 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/exynos5410-clock.txt
create mode 100644 arch/arm/boot/dts/exynos5410-smdk5410.dts
create mode 100644 arch/arm/boot/dts/exynos5410.dtsi
create mode 100644 arch/arm/mach-exynos/edcs.c
create mode 100644 drivers/clk/samsung/clk-exynos5410.c
create mode 100644 include/dt-bindings/clock/exynos5410.h

--
1.8.1.5



\
 
 \ /
  Last update: 2013-10-14 17:41    [W:0.245 / U:1.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site