lkml.org 
[lkml]   [2013]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
* Tony Lindgren <tony@atomide.com> [131010 09:09]:
> * Roger Quadros <rogerq@ti.com> [131010 06:32]:
> >
> > I tried testing this with the USB EHCI driver, but I'm not getting wake up interrupts
> > while the system is still running and only the EHCI controller is runtime suspended.
> >
> > It seems we need to somehow call _reconfigure_io_chain() to update the daisy chain
> > whenever the pad wakeup_enable bit is changed.
>
> Sounds like this is on omap3? Have you tried calling pcs_soc->rearm() in the
> pcs_irq_handle() like the comments there suggest? At least for me that keeps
> the wake-up interrupts continuously running on omap3 instead of just idle modes.
>
> Now on omap4, I've noticed the wake up interrupts are on all the time based on tests
> with the serial driver.

Oh, and if you're runtime suspending EHCI only, and if the EHCI module has
wake-up registers, it should be able to wake EHCI from retention on it's own
without a need for the io chain at all.

At least the serial driver does that if it's internal wake-up registers are
configured right. But for off-idle, the serial driver needs the io chain wake-up
events.

Regards,

Tony


\
 
 \ /
  Last update: 2013-10-10 18:41    [W:0.107 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site