lkml.org 
[lkml]   [2013]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/5] usb: gadget: s3c-hsotg: support configurable UTMI PHY width
On Mon, Oct 07, 2013 at 06:12:29AM -0400, Matt Porter wrote:
> Extend dwc2 binding with an optional utmi phy width property.
> Enable the s3c-hsotg.c driver to use standard dwc2 binding
> and enable configuration of the UTMI phy width based on the
> property.
>
> Signed-off-by: Matt Porter <matt.porter@linaro.org>
> Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
> Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
> ---
> Documentation/devicetree/bindings/staging/dwc2.txt | 4 ++++
> drivers/usb/gadget/s3c-hsotg.c | 18 +++++++++++++++++-
> drivers/usb/gadget/s3c-hsotg.h | 1 +
> 3 files changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt
> index 1a1b7cf..fb6b8ee 100644
> --- a/Documentation/devicetree/bindings/staging/dwc2.txt
> +++ b/Documentation/devicetree/bindings/staging/dwc2.txt
> @@ -6,10 +6,14 @@ Required properties:
> - reg : Should contain 1 register range (address and length)
> - interrupts : Should contain 1 interrupt
>
> +Optional properties:
> +- snps,phy-utmi-width: Must contain the UTMI data width (either 8 or 16)

isn't this available in any of the configuration registers ?

> Example:
>
> usb@101c0000 {
> compatible = "ralink,rt3050-usb, snps,dwc2";
> reg = <0x101c0000 40000>;
> interrupts = <18>;
> + snps,phy-utmi-width = <8>;

indentation.

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-10-10 18:01    [W:3.483 / U:2.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site