lkml.org 
[lkml]   [2013]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] pinctrl: nomadik: Add "ste,config" property etc
Date
From: Gabriel Fernandez <gabriel.fernandez@stericsson.com>

The "ste,config" property will contain the pin config node.
It will be easier to define a pin configuration and use it by
reference without duplicating lines tedious.

Other cleanups to the initial DT patch. This will all be
squashed into the original DT submission.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Moved bias definition into the pin controller in the
documentation.
---
.../devicetree/bindings/pinctrl/ste,nomadik.txt | 47 ++++++++++++++--------
drivers/pinctrl/pinctrl-nomadik.c | 40 ++++++++++++------
2 files changed, 58 insertions(+), 29 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
index 8639234..9a2f3f4 100644
--- a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
+++ b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
@@ -26,11 +26,12 @@ Optional subnode-properties:
- ste,function: A string containing the name of the function to mux to the
pin or group.

-- ste,input : <0/1/2/3>
+- ste,config: Handle of pin configuration node (e.g. ste,config = <&slpm_in_wkup_pdis>)
+
+- ste,input : <0/1/2>
0: input with no pull
1: input with pull up,
2: input with pull down,
- 3: input and keep last input configuration (no pull, pull up or pull down).

- ste,output: <0/1/2>
0: output low,
@@ -41,10 +42,11 @@ Optional subnode-properties:
0: sleep mode disable,
1: sleep mode enable.

-- ste,sleep-input: <0/1/2>
+- ste,sleep-input: <0/1/2/3>
0: sleep input with no pull,
1: sleep input with pull up,
2: sleep input with pull down.
+ 3: sleep input and keep last input configuration (no pull, pull up or pull down).

- ste,sleep-output: <0/1/2>
0: sleep output low,
@@ -70,14 +72,34 @@ Example board file extract:
reg = <0x80157000 0x2000>;

pinctrl-names = "default";
- pinctrl-0 = <&uart0_default_mode>;
+
+ slpm_in_wkup_pdis: slpm_in_wkup_pdis {
+ ste,sleep = <1>;
+ ste,sleep-input = <3>;
+ ste,sleep-wakeup = <1>;
+ ste,sleep-pull-disable = <0>;
+ };
+
+ slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
+ ste,sleep = <1>;
+ ste,sleep-output = <1>;
+ ste,sleep-wakeup = <1>;
+ ste,sleep-pull-disable = <0>;
+ };
+
+ slpm_out_wkup_pdis: slpm_out_wkup_pdis {
+ ste,sleep = <1>;
+ ste,sleep-output = <2>;
+ ste,sleep-wakeup = <1>;
+ ste,sleep-pull-disable = <0>;
+ };

uart0 {
uart0_default_mux: uart0_mux {
u0_default_mux {
ste,function = "u0";
ste,pins = "u0_a_1";
- };
+ };
};
uart0_default_mode: uart0_default {
uart0_default_cfg1 {
@@ -93,24 +115,15 @@ Example board file extract:
uart0_sleep_mode: uart0_sleep {
uart0_sleep_cfg1 {
ste,pins = "GPIO0", "GPIO2";
- ste,sleep = <0>;
- ste,sleep-input = <0>;
- ste,sleep-wakeup = <1>;
- ste,sleep-pull-disable = <0>;
+ ste,config = <&slpm_in_wkup_pdis>;
};
uart0_sleep_cfg2 {
ste,pins = "GPIO1";
- ste,sleep = <0>;
- ste,sleep-output = <1>;
- ste,sleep-wakeup = <1>;
- ste,sleep-pull-disable = <0>;
+ ste,config = <&slpm_out_hi_wkup_pdis>;
};
uart0_sleep_cfg3 {
ste,pins = "GPIO3";
- ste,sleep = <0>;
- ste,sleep-output = <2>;
- ste,sleep-wakeup = <1>;
- ste,sleep-pull-disable = <0>;
+ ste,config = <&slpm_out_wkup_pdis>;
};
};
};
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 451c1ab..314bcbe 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -1659,36 +1659,52 @@ static const char *nmk_find_pin_name(struct pinctrl_dev *pctldev, const char *pi
return NULL;
}

+static bool nmk_pinctrl_dt_get_config(struct device_node *np,
+ unsigned long *configs)
+{
+ bool has_config = 0;
+ unsigned long cfg = 0;
+ int i, val, ret;
+
+ for (i = 0; i < ARRAY_SIZE(nmk_cfg_params); i++) {
+ ret = of_property_read_u32(np,
+ nmk_cfg_params[i].property, &val);
+ if (ret != -EINVAL) {
+ if (nmk_dt_pin_config(i, val, &cfg) == 0) {
+ *configs |= cfg;
+ has_config = 1;
+ }
+ }
+ }
+
+ return has_config;
+}
+
int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
struct device_node *np,
struct pinctrl_map **map,
unsigned *reserved_maps,
unsigned *num_maps)
{
- int ret, i;
+ int ret;
const char *function = NULL;
unsigned long configs = 0;
bool has_config = 0;
unsigned reserve = 0;
struct property *prop;
const char *group, *gpio_name;
+ struct device_node *np_config;

ret = of_property_read_string(np, "ste,function", &function);
if (ret >= 0)
reserve = 1;

- for (i = 0; i < ARRAY_SIZE(nmk_cfg_params); i++) {
- unsigned long cfg = 0;
- int val;
+ has_config = nmk_pinctrl_dt_get_config(np, &configs);
+
+ np_config = of_parse_phandle(np, "ste,config", 0);
+ if (np_config)
+ has_config |= nmk_pinctrl_dt_get_config(np_config, &configs);

- ret = of_property_read_u32(np, nmk_cfg_params[i].property, &val);
- if (ret != -EINVAL) {
- if (nmk_dt_pin_config(i, val, &cfg) == 0) {
- configs |= cfg;
- has_config = 1;
- }
- }
- }
ret = of_property_count_strings(np, "ste,pins");
if (ret < 0)
goto exit;
--
1.7.11.3


\
 
 \ /
  Last update: 2013-01-08 12:41    [W:0.072 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site