lkml.org 
[lkml]   [2013]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3] rtc: add RTC driver for TPS80031/TPS80032
Date
Add an RTC driver for TPS80031/TPS80032 chips by TI.
This driver supports:
- Setting and getting time and date.
- Setting and reading alarm time.
- Alarm and interrupt functionlity.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
Changes from V1:
- remvoe the checks for alarm time whether this is past or not in set_alarm.
- add error prints if rtc registration failed.
- add include of pm.h

Changes from V2:
- Realize from other driver that devinit and devexit has been removed from driver.
Hence removing the same from this driver.
- Rebase to 20130107 to avoid any merge conflict.
- Copyright year to 2012-2013.
- Set month to 0 inplace of 1 when need to initialise in probe.

drivers/rtc/Kconfig | 8 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-tps80031.c | 349 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 358 insertions(+), 0 deletions(-)
create mode 100644 drivers/rtc/rtc-tps80031.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 37b0388..b869410 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -386,6 +386,14 @@ config RTC_DRV_TPS65910
This driver can also be built as a module. If so, the module
will be called rtc-tps65910.

+config RTC_DRV_TPS80031
+ tristate "TI TPS80031/TPS80032 RTC driver"
+ depends on MFD_TPS80031
+ help
+ TI Power Managment IC TPS80031 supports RTC functionality
+ along with alarm. This driver supports the RTC driver for
+ the TPS80031 RTC module.
+
config RTC_DRV_RC5T583
tristate "RICOH 5T583 RTC driver"
depends on MFD_RC5T583
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 258147a..8dbae19 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -115,6 +115,7 @@ obj-$(CONFIG_RTC_DRV_TILE) += rtc-tile.o
obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl.o
obj-$(CONFIG_RTC_DRV_TPS6586X) += rtc-tps6586x.o
obj-$(CONFIG_RTC_DRV_TPS65910) += rtc-tps65910.o
+obj-$(CONFIG_RTC_DRV_TPS80031) += rtc-tps80031.o
obj-$(CONFIG_RTC_DRV_TX4939) += rtc-tx4939.o
obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o
obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o
diff --git a/drivers/rtc/rtc-tps80031.c b/drivers/rtc/rtc-tps80031.c
new file mode 100644
index 0000000..4a24249
--- /dev/null
+++ b/drivers/rtc/rtc-tps80031.c
@@ -0,0 +1,349 @@
+/*
+ * rtc-tps80031.c -- TI TPS80031/TPS80032 RTC driver
+ *
+ * RTC driver for TI TPS80031/TPS80032 Fully Integrated
+ * Power Management with Power Path and Battery Charger
+ *
+ * Copyright (c) 2012-2013, NVIDIA Corporation.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/bcd.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/tps80031.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+#define ENABLE_ALARM_INT 0x08
+#define ALARM_INT_STATUS 0x40
+
+/**
+ * Setting bit to 1 in STOP_RTC will run the RTC and
+ * setting this bit to 0 will freeze RTC.
+ */
+#define STOP_RTC 0x1
+
+/* Power on reset Values of RTC registers */
+#define TPS80031_RTC_POR_YEAR 0
+#define TPS80031_RTC_POR_MONTH 1
+#define TPS80031_RTC_POR_DAY 1
+
+/* Numbers of registers for time and alarms */
+#define TPS80031_RTC_TIME_NUM_REGS 7
+#define TPS80031_RTC_ALARM_NUM_REGS 6
+
+/**
+ * PMU RTC have only 2 nibbles to store year information, so using an
+ * offset of 100 to set the base year as 2000 for our driver.
+ */
+#define RTC_YEAR_OFFSET 100
+
+struct tps80031_rtc {
+ struct rtc_device *rtc;
+ int irq;
+};
+
+static int tps80031_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ u8 buff[TPS80031_RTC_TIME_NUM_REGS];
+ int ret;
+
+ ret = tps80031_reads(dev->parent, TPS80031_SLAVE_ID1,
+ TPS80031_SECONDS_REG, TPS80031_RTC_TIME_NUM_REGS, buff);
+ if (ret < 0) {
+ dev_err(dev, "reading RTC_SECONDS_REG failed, err = %d\n", ret);
+ return ret;
+ }
+
+ tm->tm_sec = bcd2bin(buff[0]);
+ tm->tm_min = bcd2bin(buff[1]);
+ tm->tm_hour = bcd2bin(buff[2]);
+ tm->tm_mday = bcd2bin(buff[3]);
+ tm->tm_mon = bcd2bin(buff[4]) - 1;
+ tm->tm_year = bcd2bin(buff[5]) + RTC_YEAR_OFFSET;
+ tm->tm_wday = bcd2bin(buff[6]);
+ return 0;
+}
+
+static int tps80031_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ u8 buff[7];
+ int ret;
+
+ buff[0] = bin2bcd(tm->tm_sec);
+ buff[1] = bin2bcd(tm->tm_min);
+ buff[2] = bin2bcd(tm->tm_hour);
+ buff[3] = bin2bcd(tm->tm_mday);
+ buff[4] = bin2bcd(tm->tm_mon + 1);
+ buff[5] = bin2bcd(tm->tm_year % RTC_YEAR_OFFSET);
+ buff[6] = bin2bcd(tm->tm_wday);
+
+ /* Stop RTC while updating the RTC time registers */
+ ret = tps80031_clr_bits(dev->parent, TPS80031_SLAVE_ID1,
+ TPS80031_RTC_CTRL_REG, STOP_RTC);
+ if (ret < 0) {
+ dev_err(dev->parent, "Stop RTC failed, err = %d\n", ret);
+ return ret;
+ }
+
+ ret = tps80031_writes(dev->parent, TPS80031_SLAVE_ID1,
+ TPS80031_SECONDS_REG,
+ TPS80031_RTC_TIME_NUM_REGS, buff);
+ if (ret < 0) {
+ dev_err(dev, "writing RTC_SECONDS_REG failed, err %d\n", ret);
+ return ret;
+ }
+
+ ret = tps80031_set_bits(dev->parent, TPS80031_SLAVE_ID1,
+ TPS80031_RTC_CTRL_REG, STOP_RTC);
+ if (ret < 0)
+ dev_err(dev->parent, "Start RTC failed, err = %d\n", ret);
+ return ret;
+}
+
+static int tps80031_rtc_alarm_irq_enable(struct device *dev,
+ unsigned int enable)
+{
+ int ret;
+
+ if (enable)
+ ret = tps80031_set_bits(dev->parent, TPS80031_SLAVE_ID1,
+ TPS80031_RTC_INTERRUPTS_REG, ENABLE_ALARM_INT);
+ else
+ ret = tps80031_clr_bits(dev->parent, TPS80031_SLAVE_ID1,
+ TPS80031_RTC_INTERRUPTS_REG, ENABLE_ALARM_INT);
+ if (ret < 0) {
+ dev_err(dev, "Update on RTC_INT failed, err = %d\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int tps80031_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ u8 buff[TPS80031_RTC_ALARM_NUM_REGS];
+ int ret;
+
+ buff[0] = bin2bcd(alrm->time.tm_sec);
+ buff[1] = bin2bcd(alrm->time.tm_min);
+ buff[2] = bin2bcd(alrm->time.tm_hour);
+ buff[3] = bin2bcd(alrm->time.tm_mday);
+ buff[4] = bin2bcd(alrm->time.tm_mon + 1);
+ buff[5] = bin2bcd(alrm->time.tm_year % RTC_YEAR_OFFSET);
+ ret = tps80031_writes(dev->parent, TPS80031_SLAVE_ID1,
+ TPS80031_ALARM_SECONDS_REG,
+ TPS80031_RTC_ALARM_NUM_REGS, buff);
+ if (ret < 0) {
+ dev_err(dev, "Writing RTC_ALARM failed, err %d\n", ret);
+ return ret;
+ }
+ return tps80031_rtc_alarm_irq_enable(dev, alrm->enabled);
+}
+
+static int tps80031_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ u8 buff[6];
+ int ret;
+
+ ret = tps80031_reads(dev->parent, TPS80031_SLAVE_ID1,
+ TPS80031_ALARM_SECONDS_REG,
+ TPS80031_RTC_ALARM_NUM_REGS, buff);
+ if (ret < 0) {
+ dev_err(dev->parent,
+ "reading RTC_ALARM failed, err = %d\n", ret);
+ return ret;
+ }
+
+ alrm->time.tm_sec = bcd2bin(buff[0]);
+ alrm->time.tm_min = bcd2bin(buff[1]);
+ alrm->time.tm_hour = bcd2bin(buff[2]);
+ alrm->time.tm_mday = bcd2bin(buff[3]);
+ alrm->time.tm_mon = bcd2bin(buff[4]) - 1;
+ alrm->time.tm_year = bcd2bin(buff[5]) + RTC_YEAR_OFFSET;
+ return 0;
+}
+
+static int clear_alarm_int_status(struct device *dev, struct tps80031_rtc *rtc)
+{
+ int ret;
+ u8 buf;
+
+ /**
+ * As per datasheet, A dummy read of this RTC_STATUS_REG register
+ * is necessary before each I2C read in order to update the status
+ * register value.
+ */
+ ret = tps80031_read(dev->parent, TPS80031_SLAVE_ID1,
+ TPS80031_RTC_STATUS_REG, &buf);
+ if (ret < 0) {
+ dev_err(dev, "reading RTC_STATUS failed. err = %d\n", ret);
+ return ret;
+ }
+
+ /* clear Alarm status bits.*/
+ ret = tps80031_set_bits(dev->parent, TPS80031_SLAVE_ID1,
+ TPS80031_RTC_STATUS_REG, ALARM_INT_STATUS);
+ if (ret < 0) {
+ dev_err(dev, "clear Alarm INT failed, err = %d\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static irqreturn_t tps80031_rtc_irq(int irq, void *data)
+{
+ struct device *dev = data;
+ struct tps80031_rtc *rtc = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clear_alarm_int_status(dev, rtc);
+ if (ret < 0)
+ return ret;
+
+ rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
+ return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops tps80031_rtc_ops = {
+ .read_time = tps80031_rtc_read_time,
+ .set_time = tps80031_rtc_set_time,
+ .set_alarm = tps80031_rtc_set_alarm,
+ .read_alarm = tps80031_rtc_read_alarm,
+ .alarm_irq_enable = tps80031_rtc_alarm_irq_enable,
+};
+
+static int tps80031_rtc_probe(struct platform_device *pdev)
+{
+ struct tps80031_rtc *rtc;
+ struct rtc_time tm;
+ int ret;
+
+ rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+ if (!rtc)
+ return -ENOMEM;
+
+ rtc->irq = platform_get_irq(pdev, 0);
+ platform_set_drvdata(pdev, rtc);
+
+ /* Start RTC */
+ ret = tps80031_set_bits(pdev->dev.parent, TPS80031_SLAVE_ID1,
+ TPS80031_RTC_CTRL_REG, STOP_RTC);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to start RTC. err = %d\n", ret);
+ return ret;
+ }
+
+ /* If RTC have POR values, set time 01:01:2000 */
+ tps80031_rtc_read_time(&pdev->dev, &tm);
+ if ((tm.tm_year == RTC_YEAR_OFFSET + TPS80031_RTC_POR_YEAR) &&
+ (tm.tm_mon == (TPS80031_RTC_POR_MONTH - 1)) &&
+ (tm.tm_mday == TPS80031_RTC_POR_DAY)) {
+ tm.tm_year = 2000;
+ tm.tm_mday = 1;
+ tm.tm_mon = 0;
+ ret = tps80031_rtc_set_time(&pdev->dev, &tm);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "RTC set time failed, err = %d\n", ret);
+ return ret;
+ }
+ }
+
+ /* Clear alarm intretupt status if it is there */
+ ret = clear_alarm_int_status(&pdev->dev, rtc);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Clear alarm int failed, err = %d\n", ret);
+ return ret;
+ }
+
+ rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
+ &tps80031_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc->rtc)) {
+ ret = PTR_ERR(rtc->rtc);
+ dev_err(&pdev->dev, "RTC registration failed, err %d\n", ret);
+ return ret;
+ }
+
+ ret = request_threaded_irq(rtc->irq, NULL, tps80031_rtc_irq,
+ IRQF_ONESHOT | IRQF_EARLY_RESUME,
+ dev_name(&pdev->dev), rtc);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "request IRQ:%d failed, err = %d\n",
+ rtc->irq, ret);
+ rtc_device_unregister(rtc->rtc);
+ return ret;
+ }
+ device_set_wakeup_capable(&pdev->dev, 1);
+ return 0;
+}
+
+static int tps80031_rtc_remove(struct platform_device *pdev)
+{
+ struct tps80031_rtc *rtc = platform_get_drvdata(pdev);
+
+ free_irq(rtc->irq, rtc);
+ rtc_device_unregister(rtc->rtc);
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tps80031_rtc_suspend(struct device *dev)
+{
+ struct tps80031_rtc *rtc = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(rtc->irq);
+ return 0;
+}
+
+static int tps80031_rtc_resume(struct device *dev)
+{
+ struct tps80031_rtc *rtc = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(rtc->irq);
+ return 0;
+};
+#endif
+
+static const struct dev_pm_ops tps80031_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(tps80031_rtc_suspend, tps80031_rtc_resume)
+};
+
+static struct platform_driver tps80031_rtc_driver = {
+ .driver = {
+ .name = "tps80031-rtc",
+ .owner = THIS_MODULE,
+ .pm = &tps80031_pm_ops,
+ },
+ .probe = tps80031_rtc_probe,
+ .remove = tps80031_rtc_remove,
+};
+
+module_platform_driver(tps80031_rtc_driver);
+
+MODULE_ALIAS("platform:tps80031-rtc");
+MODULE_DESCRIPTION("TI TPS80031/TPS80032 RTC driver");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL v2");
--
1.7.1.1


\
 
 \ /
  Last update: 2013-01-07 10:01    [W:0.037 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site