lkml.org 
[lkml]   [2013]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7u1 26/31] x86: Don't enable swiotlb if there is not enough ram for it
On Mon, Jan 07, 2013 at 06:22:51PM -0800, Eric W. Biederman wrote:
> Shuah Khan <shuahkhan@gmail.com> writes:
>
> > On Mon, Jan 7, 2013 at 8:26 AM, Konrad Rzeszutek Wilk
> > <konrad.wilk@oracle.com> wrote:
> >> On Fri, Jan 04, 2013 at 02:10:25PM -0800, Yinghai Lu wrote:
> >>> On Fri, Jan 4, 2013 at 1:02 PM, Shuah Khan <shuahkhan@gmail.com> wrote:
> >>> > Pani'cing the system doesn't sound like a good option to me in this
> >>> > case. This change to disable swiotlb is made for kdump. However, with
> >>> > this change several system fail to boot, unless crashkernel_low=72M is
> >>> > specified.
> >>>
> >>> this patchset is new feature to put second kdump kernel above 4G.
> >>>
> >>> >
> >>> > I would the say the right approach to solve this would be to not
> >>> > change the current pci_swiotlb_detect_override() behavior and treat
> >>> > swiotlb =1 upon entry equivalent to swiotlb_force set.
> >>>
> >>> that will make intel system have to take crashkernel_low=72M too.
> >>> otherwise intel system will get panic during swiotlb allocation.
> >>
> >> Two things:
> >>
> >> 1). You need to wrap the 'is_enough_..' in CONFIG_KEXEC, which means
> >> that the function needs to go in a header file.
> >> 2). The check for 1MB is suspect. Why only 1MB? You mentioned it is
> >> b/c of crashkernel_low=72M (which I am not seeing in v3.8 kernel-parameters.txt?
> >> Is that part of your mega-patchset?). Anyhow, there seems to be a disconnect -
> >> what if the user supplied crashkernel_low=27M? Perhaps the 'is_enough'
> >> should also parse the bootparams to double-check that there is enough
> >> low-mem space? But then if the kernel grows then 72M might not be enough -
> >> you might need 82M with 3.9.
> >>
> >> Perhaps a better way for this is to do:
> >> 1). Change 'is_enough' to check only for 4MB.
> >> 2). When booting as kexec, the SWIOTLB would only use 4MB instead of 64MB?
> >>
> >> Or, we could also use the post-late SWIOTLB initialization similiary to how it was
> >> done on ia64. This would mean that the AMD VI code would just call the
> >> .. something like this - NOT tested or even compile tested:
> >>
> >> diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> >> index c1c74e0..e7fa8f7 100644
> >> --- a/drivers/iommu/amd_iommu.c
> >> +++ b/drivers/iommu/amd_iommu.c
> >> @@ -3173,6 +3173,24 @@ int __init amd_iommu_init_dma_ops(void)
> >> if (unhandled && max_pfn > MAX_DMA32_PFN) {
> >> /* There are unhandled devices - initialize swiotlb for them */
> >> swiotlb = 1;
> >> + /* Late (so no bootmem allocator) usage and only if the early SWIOTLB
> >> + * hadn't been allocated (which can happen on kexec kernels booted
> >> + * above 4GB). */
> >> + if (!swiotlb_nr_tbl()) {
> >> + int retry = 3;
> >> + int mb_size = 64;
> >> + int rc = 0;
> >> +retry_me:
> >> + if (retry < 0)
> >> + panic("We tried setting %dMB for SWIOTLB but got -ENOMEM", mb_size << 1);
> >> + rc = swiotlb_late_init_with_default_size(mb_size * (1<<20));
> >> + if (rc) {
> >> + retry --;
> >> + mb_size >> 1;
> >> + goto retry_me;
> >> + }
> >> + dma_ops = &swiotlb_dma_ops;
> >> + }
> >> }
> >>
> >> amd_iommu_stats_init();
> >>
> >> And then the early SWIOTLB initialization for 64MB can fail and we are still OK.
> >>>
> >
> > Yinghai/Konrad,
> >
> > Did more testing. btw this patch depends on your [v7u1,25/31]
> > memblock: add memblock_mem_size(). Here are the test results:
> >
> > 1. When there is not enough memory: (enough_mem_for_swiotlb() returns false)
> > system will panic in amd_iommu_init_dma_ops().
> >
> > 2. When there is enough memory: (enough_mem_for_swiotlb() returns true):
> > swiotlb is reserved
> > pci_swiotlb_late_init() leaves the buffer allocated since swiotlb=1
> > with that getting changed in amd_iommu_init_dma_ops().
> >
> > I agree with Konrad that the logic should be wrapped in CONFIG_KEXEC.
>
> If enough_mem_for_swiotlb needs to be conditional on CONFIG_KEXEC the
> code is architected wrong. None of this logic has anything to do with
> kexec except that the kexec path is one way to get this condition to
> happen. Especially since the kexec'd kernel where this condition occurs
> does not need kexec support built in.

Fair enough - with the 'memmap' command line options one can trigger
this.
>
> Yinghai I sat down and read your patch and the approach you are taking
> is totally wrong.
>
> The problem is that swiotlb_init() in lib/swiotlb.c does not know how to
> fail without panic'ing the system.
>
> Which leaves two valid approaches.
> - Create a variant of swiotlb_init that can fail for use on x86 and
> handle the failure.

As an safe-fail step we could retry with an smaller size until a fit is found.

> - Delay initializing the swiotlb until someone actually needs a mapping
> from it.

So late init the SWIOTLB and perhaps have multiple "segments" of 4MB
of SWIOTLB that can grow as we exhaust its memory. Could work.
>
> Delaying the initialization of the swiotlb is out because the code
> needs an early memory allocation to get a large chunk of contiguous
> memory for the bounce buffers.

Or it can use the late init, but with a smaller chunk of memory.

>
> Which means the panics that occurr in swiotlb_init() need to be delayed
> until someone something actually needs bounce buffers from the swiotlb.
>
> Although arguably what should actually happen instead of panic() is that
> swiotlb_map_single should simply fail early when it was not possible to
> preallocate bounce buffers.

This sounds like a Catch-22. Fail early implies that it would have to do
this when using the bootmem allocator. But the swiotlb_map_single is not
called at that time - it is called _after_ the bootmem allocator has been
de-activated. Actually it is called pretty late - when built-in PCI devices
start off or when 'udev' starts scanning the PCI bus and loading modules.

I think I am misunderstanding you - could you clarify please?



\
 
 \ /
  Last update: 2013-01-08 04:21    [W:0.251 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site