lkml.org 
[lkml]   [2013]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/16] dmaengine: ste_dma40: support more than 128 event lines
Date
From: Tong Liu <tong.liu@stericsson.com>

U8540 DMA controller is different from u9540 we need define new
registers and use them to support handling more than 128 event lines.

Signed-off-by: Tong Liu <tong.liu@stericsson.com>
Reviewed-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
---
drivers/dma/ste_dma40.c | 306 +++++++++++++++++++++++++++++++++------------
drivers/dma/ste_dma40_ll.h | 130 ++++++++++++++++++-
2 files changed, 355 insertions(+), 81 deletions(-)

diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index ca18117..67e565b 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -53,6 +53,8 @@
#define D40_ALLOC_PHY (1 << 30)
#define D40_ALLOC_LOG_FREE 0

+#define MAX(a, b) (((a) < (b)) ? (b) : (a))
+
/**
* enum 40_command - The different commands and/or statuses.
*
@@ -100,8 +102,19 @@ static u32 d40_backup_regs[] = {

#define BACKUP_REGS_SZ ARRAY_SIZE(d40_backup_regs)

-/* TODO: Check if all these registers have to be saved/restored on dma40 v3 */
-static u32 d40_backup_regs_v3[] = {
+/*
+ * since 9540 and 8540 has the same HW revision
+ * use v4a for 9540 or ealier
+ * use v4b for 8540 or later
+ * HW revision:
+ * DB8500ed has revision 0
+ * DB8500v1 has revision 2
+ * DB8500v2 has revision 3
+ * AP9540v1 has revision 4
+ * DB8540v1 has revision 4
+ * TODO: Check if all these registers have to be saved/restored on dma40 v4a
+ */
+static u32 d40_backup_regs_v4a[] = {
D40_DREG_PSEG1,
D40_DREG_PSEG2,
D40_DREG_PSEG3,
@@ -120,7 +133,32 @@ static u32 d40_backup_regs_v3[] = {
D40_DREG_RCEG4,
};

-#define BACKUP_REGS_SZ_V3 ARRAY_SIZE(d40_backup_regs_v3)
+#define BACKUP_REGS_SZ_V4A ARRAY_SIZE(d40_backup_regs_v4a)
+
+static u32 d40_backup_regs_v4b[] = {
+ D40_DREG_CPSEG1,
+ D40_DREG_CPSEG2,
+ D40_DREG_CPSEG3,
+ D40_DREG_CPSEG4,
+ D40_DREG_CPSEG5,
+ D40_DREG_CPCEG1,
+ D40_DREG_CPCEG2,
+ D40_DREG_CPCEG3,
+ D40_DREG_CPCEG4,
+ D40_DREG_CPCEG5,
+ D40_DREG_CRSEG1,
+ D40_DREG_CRSEG2,
+ D40_DREG_CRSEG3,
+ D40_DREG_CRSEG4,
+ D40_DREG_CRSEG5,
+ D40_DREG_CRCEG1,
+ D40_DREG_CRCEG2,
+ D40_DREG_CRCEG3,
+ D40_DREG_CRCEG4,
+ D40_DREG_CRCEG5,
+};
+
+#define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b)

static u32 d40_backup_regs_chan[] = {
D40_CHAN_REG_SSCFG,
@@ -134,6 +172,102 @@ static u32 d40_backup_regs_chan[] = {
};

/**
+ * struct d40_interrupt_lookup - lookup table for interrupt handler
+ *
+ * @src: Interrupt mask register.
+ * @clr: Interrupt clear register.
+ * @is_error: true if this is an error interrupt.
+ * @offset: start delta in the lookup_log_chans in d40_base. If equals to
+ * D40_PHY_CHAN, the lookup_phy_chans shall be used instead.
+ */
+struct d40_interrupt_lookup {
+ u32 src;
+ u32 clr;
+ bool is_error;
+ int offset;
+};
+
+
+static struct d40_interrupt_lookup il_v4a[] = {
+ {D40_DREG_LCTIS0, D40_DREG_LCICR0, false, 0},
+ {D40_DREG_LCTIS1, D40_DREG_LCICR1, false, 32},
+ {D40_DREG_LCTIS2, D40_DREG_LCICR2, false, 64},
+ {D40_DREG_LCTIS3, D40_DREG_LCICR3, false, 96},
+ {D40_DREG_LCEIS0, D40_DREG_LCICR0, true, 0},
+ {D40_DREG_LCEIS1, D40_DREG_LCICR1, true, 32},
+ {D40_DREG_LCEIS2, D40_DREG_LCICR2, true, 64},
+ {D40_DREG_LCEIS3, D40_DREG_LCICR3, true, 96},
+ {D40_DREG_PCTIS, D40_DREG_PCICR, false, D40_PHY_CHAN},
+ {D40_DREG_PCEIS, D40_DREG_PCICR, true, D40_PHY_CHAN},
+};
+
+static struct d40_interrupt_lookup il_v4b[] = {
+ {D40_DREG_CLCTIS1, D40_DREG_CLCICR1, false, 0},
+ {D40_DREG_CLCTIS2, D40_DREG_CLCICR2, false, 32},
+ {D40_DREG_CLCTIS3, D40_DREG_CLCICR3, false, 64},
+ {D40_DREG_CLCTIS4, D40_DREG_CLCICR4, false, 96},
+ {D40_DREG_CLCTIS5, D40_DREG_CLCICR5, false, 128},
+ {D40_DREG_CLCEIS1, D40_DREG_CLCICR1, true, 0},
+ {D40_DREG_CLCEIS2, D40_DREG_CLCICR2, true, 32},
+ {D40_DREG_CLCEIS3, D40_DREG_CLCICR3, true, 64},
+ {D40_DREG_CLCEIS4, D40_DREG_CLCICR4, true, 96},
+ {D40_DREG_CLCEIS5, D40_DREG_CLCICR5, true, 128},
+ {D40_DREG_CPCTIS, D40_DREG_CPCICR, false, D40_PHY_CHAN},
+ {D40_DREG_CPCEIS, D40_DREG_CPCICR, true, D40_PHY_CHAN},
+};
+
+/**
+ * struct d40_reg_val - simple lookup struct
+ *
+ * @reg: The register.
+ * @val: The value that belongs to the register in reg.
+ */
+struct d40_reg_val {
+ unsigned int reg;
+ unsigned int val;
+};
+
+static __initdata struct d40_reg_val dma_init_reg_v4a[] = {
+ /* Clock every part of the DMA block from start */
+ { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL},
+
+ /* Interrupts on all logical channels */
+ { .reg = D40_DREG_LCMIS0, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_LCMIS1, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_LCMIS2, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_LCMIS3, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_LCICR0, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_LCICR1, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_LCICR2, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_LCICR3, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_LCTIS0, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_LCTIS1, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_LCTIS2, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_LCTIS3, .val = 0xFFFFFFFF}
+};
+static __initdata struct d40_reg_val dma_init_reg_v4b[] = {
+ /* Clock every part of the DMA block from start */
+ { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL},
+
+ /* Interrupts on all logical channels */
+ { .reg = D40_DREG_CLCMIS1, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCMIS2, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCMIS3, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCMIS4, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCMIS5, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCICR1, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCICR2, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCICR3, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCICR4, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCICR5, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCTIS1, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCTIS2, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCTIS3, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCTIS4, .val = 0xFFFFFFFF},
+ { .reg = D40_DREG_CLCTIS5, .val = 0xFFFFFFFF}
+};
+
+/**
* struct d40_lli_pool - Structure for keeping LLIs in memory
*
* @base: Pointer to memory area when the pre_alloc_lli's are not large
@@ -289,6 +423,38 @@ struct d40_chan {
};

/**
+ * struct d40_gen_dmac - generic values to represent u8500/u8540 DMA
+ * controller
+ *
+ * @backup: the pointer to the registers address array for backup
+ * @backup_size: the size of the registers address array for backup
+ * @realtime_en: the realtime enable register
+ * @realtime_clear: the realtime clear register
+ * @high_prio_en: the high priority enable register
+ * @high_prio_clear: the high priority clear register
+ * @interrupt_en: the interrupt enable register
+ * @interrupt_clear: the interrupt clear register
+ * @il: the pointer to struct d40_interrupt_lookup
+ * @il_size: the size of d40_interrupt_lookup array
+ * @init_reg: the pointer to the struct d40_reg_val
+ * @init_reg_size: the size of d40_reg_val array
+ */
+struct d40_gen_dmac {
+ u32 *backup;
+ u32 backup_size;
+ u32 realtime_en;
+ u32 realtime_clear;
+ u32 high_prio_en;
+ u32 high_prio_clear;
+ u32 interrupt_en;
+ u32 interrupt_clear;
+ struct d40_interrupt_lookup *il;
+ u32 il_size;
+ struct d40_reg_val *init_reg;
+ u32 init_reg_size;
+};
+
+/**
* struct d40_base - The big global struct, one for each probe'd instance.
*
* @interrupt_lock: Lock used to make sure one interrupt is handle a time.
@@ -326,11 +492,13 @@ struct d40_chan {
* @desc_slab: cache for descriptors.
* @reg_val_backup: Here the values of some hardware registers are stored
* before the DMA is powered off. They are restored when the power is back on.
- * @reg_val_backup_v3: Backup of registers that only exits on dma40 v3 and
- * later.
+ * @reg_val_backup_v4: Backup of registers that only exits on dma40 v3 and
+ * later
* @reg_val_backup_chan: Backup data for standard channel parameter registers.
* @gcc_pwr_off_mask: Mask to maintain the channels that can be turned off.
* @initialized: true if the dma has been initialized
+ * @gen_dmac: the struct for generic registers values to represent u8500/8540
+ * DMA controller
*/
struct d40_base {
spinlock_t interrupt_lock;
@@ -362,37 +530,11 @@ struct d40_base {
resource_size_t lcpa_size;
struct kmem_cache *desc_slab;
u32 reg_val_backup[BACKUP_REGS_SZ];
- u32 reg_val_backup_v3[BACKUP_REGS_SZ_V3];
+ u32 reg_val_backup_v4[MAX(BACKUP_REGS_SZ_V4A, BACKUP_REGS_SZ_V4B)];
u32 *reg_val_backup_chan;
u16 gcc_pwr_off_mask;
bool initialized;
-};
-
-/**
- * struct d40_interrupt_lookup - lookup table for interrupt handler
- *
- * @src: Interrupt mask register.
- * @clr: Interrupt clear register.
- * @is_error: true if this is an error interrupt.
- * @offset: start delta in the lookup_log_chans in d40_base. If equals to
- * D40_PHY_CHAN, the lookup_phy_chans shall be used instead.
- */
-struct d40_interrupt_lookup {
- u32 src;
- u32 clr;
- bool is_error;
- int offset;
-};
-
-/**
- * struct d40_reg_val - simple lookup struct
- *
- * @reg: The register.
- * @val: The value that belongs to the register in reg.
- */
-struct d40_reg_val {
- unsigned int reg;
- unsigned int val;
+ struct d40_gen_dmac gen_dmac;
};

static struct device *chan2dev(struct d40_chan *d40c)
@@ -875,11 +1017,11 @@ static void d40_save_restore_registers(struct d40_base *base, bool save)
save);

/* Save/Restore registers only existing on dma40 v3 and later */
- if (base->rev >= 3)
- dma40_backup(base->virtbase, base->reg_val_backup_v3,
- d40_backup_regs_v3,
- ARRAY_SIZE(d40_backup_regs_v3),
- save);
+ if (base->gen_dmac.backup)
+ dma40_backup(base->virtbase, base->reg_val_backup_v4,
+ base->gen_dmac.backup,
+ base->gen_dmac.backup_size,
+ save);
}
#else
static void d40_save_restore_registers(struct d40_base *base, bool save)
@@ -1470,41 +1612,30 @@ err:

static irqreturn_t d40_handle_interrupt(int irq, void *data)
{
- static const struct d40_interrupt_lookup il[] = {
- {D40_DREG_LCTIS0, D40_DREG_LCICR0, false, 0},
- {D40_DREG_LCTIS1, D40_DREG_LCICR1, false, 32},
- {D40_DREG_LCTIS2, D40_DREG_LCICR2, false, 64},
- {D40_DREG_LCTIS3, D40_DREG_LCICR3, false, 96},
- {D40_DREG_LCEIS0, D40_DREG_LCICR0, true, 0},
- {D40_DREG_LCEIS1, D40_DREG_LCICR1, true, 32},
- {D40_DREG_LCEIS2, D40_DREG_LCICR2, true, 64},
- {D40_DREG_LCEIS3, D40_DREG_LCICR3, true, 96},
- {D40_DREG_PCTIS, D40_DREG_PCICR, false, D40_PHY_CHAN},
- {D40_DREG_PCEIS, D40_DREG_PCICR, true, D40_PHY_CHAN},
- };
-
int i;
- u32 regs[ARRAY_SIZE(il)];
u32 idx;
u32 row;
long chan = -1;
struct d40_chan *d40c;
unsigned long flags;
struct d40_base *base = data;
+ u32 regs[base->gen_dmac.il_size];
+ struct d40_interrupt_lookup *il = base->gen_dmac.il;
+ u32 il_size = base->gen_dmac.il_size;

spin_lock_irqsave(&base->interrupt_lock, flags);

/* Read interrupt status of both logical and physical channels */
- for (i = 0; i < ARRAY_SIZE(il); i++)
+ for (i = 0; i < il_size; i++)
regs[i] = readl(base->virtbase + il[i].src);

for (;;) {

chan = find_next_bit((unsigned long *)regs,
- BITS_PER_LONG * ARRAY_SIZE(il), chan + 1);
+ BITS_PER_LONG * il_size, chan + 1);

/* No more set bits found? */
- if (chan == BITS_PER_LONG * ARRAY_SIZE(il))
+ if (chan == BITS_PER_LONG * il_size)
break;

row = chan / BITS_PER_LONG;
@@ -2189,12 +2320,14 @@ static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src)
{
bool realtime = d40c->dma_cfg.realtime;
bool highprio = d40c->dma_cfg.high_priority;
- u32 rtreg = realtime ? D40_DREG_RSEG1 : D40_DREG_RCEG1;
+ u32 rtreg;
u32 event = D40_TYPE_TO_EVENT(dev_type);
u32 group = D40_TYPE_TO_GROUP(dev_type);
u32 bit = 1 << event;
u32 prioreg;
+ struct d40_gen_dmac *dmac = &d40c->base->gen_dmac;

+ rtreg = realtime ? dmac->realtime_en : dmac->realtime_clear;
/*
* Due to a hardware bug, in some cases a logical channel triggered by
* a high priority destination event line can generate extra packet
@@ -2206,7 +2339,7 @@ static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src)
if (!src && chan_is_logical(d40c))
highprio = false;

- prioreg = highprio ? D40_DREG_PSEG1 : D40_DREG_PCEG1;
+ prioreg = highprio ? dmac->high_prio_en : dmac->high_prio_clear;

/* Destination event lines are stored in the upper halfword */
if (!src)
@@ -3056,6 +3189,36 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
base->phy_chans = ((void *)base) + ALIGN(sizeof(struct d40_base), 4);
base->log_chans = &base->phy_chans[num_phy_chans];

+ if (base->plat_data->num_of_phy_chans == 14) {
+ base->gen_dmac.backup = d40_backup_regs_v4b;
+ base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4B;
+ base->gen_dmac.interrupt_en = D40_DREG_CPCMIS;
+ base->gen_dmac.interrupt_clear = D40_DREG_CPCICR;
+ base->gen_dmac.realtime_en = D40_DREG_CRSEG1;
+ base->gen_dmac.realtime_clear = D40_DREG_CRCEG1;
+ base->gen_dmac.high_prio_en = D40_DREG_CPSEG1;
+ base->gen_dmac.high_prio_clear = D40_DREG_CPCEG1;
+ base->gen_dmac.il = il_v4b;
+ base->gen_dmac.il_size = ARRAY_SIZE(il_v4b);
+ base->gen_dmac.init_reg = dma_init_reg_v4b;
+ base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4b);
+ } else {
+ if (base->rev >= 3) {
+ base->gen_dmac.backup = d40_backup_regs_v4a;
+ base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4A;
+ }
+ base->gen_dmac.interrupt_en = D40_DREG_PCMIS;
+ base->gen_dmac.interrupt_clear = D40_DREG_PCICR;
+ base->gen_dmac.realtime_en = D40_DREG_RSEG1;
+ base->gen_dmac.realtime_clear = D40_DREG_RCEG1;
+ base->gen_dmac.high_prio_en = D40_DREG_PSEG1;
+ base->gen_dmac.high_prio_clear = D40_DREG_PCEG1;
+ base->gen_dmac.il = il_v4a;
+ base->gen_dmac.il_size = ARRAY_SIZE(il_v4a);
+ base->gen_dmac.init_reg = dma_init_reg_v4a;
+ base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4a);
+ }
+
base->phy_res = kzalloc(num_phy_chans * sizeof(struct d40_phy_res),
GFP_KERNEL);
if (!base->phy_res)
@@ -3127,31 +3290,15 @@ failure:
static void __init d40_hw_init(struct d40_base *base)
{

- static struct d40_reg_val dma_init_reg[] = {
- /* Clock every part of the DMA block from start */
- { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL},
-
- /* Interrupts on all logical channels */
- { .reg = D40_DREG_LCMIS0, .val = 0xFFFFFFFF},
- { .reg = D40_DREG_LCMIS1, .val = 0xFFFFFFFF},
- { .reg = D40_DREG_LCMIS2, .val = 0xFFFFFFFF},
- { .reg = D40_DREG_LCMIS3, .val = 0xFFFFFFFF},
- { .reg = D40_DREG_LCICR0, .val = 0xFFFFFFFF},
- { .reg = D40_DREG_LCICR1, .val = 0xFFFFFFFF},
- { .reg = D40_DREG_LCICR2, .val = 0xFFFFFFFF},
- { .reg = D40_DREG_LCICR3, .val = 0xFFFFFFFF},
- { .reg = D40_DREG_LCTIS0, .val = 0xFFFFFFFF},
- { .reg = D40_DREG_LCTIS1, .val = 0xFFFFFFFF},
- { .reg = D40_DREG_LCTIS2, .val = 0xFFFFFFFF},
- { .reg = D40_DREG_LCTIS3, .val = 0xFFFFFFFF}
- };
int i;
u32 prmseo[2] = {0, 0};
u32 activeo[2] = {0xFFFFFFFF, 0xFFFFFFFF};
u32 pcmis = 0;
u32 pcicr = 0;
+ struct d40_reg_val *dma_init_reg = base->gen_dmac.init_reg;
+ u32 reg_size = base->gen_dmac.init_reg_size;

- for (i = 0; i < ARRAY_SIZE(dma_init_reg); i++)
+ for (i = 0; i < reg_size; i++)
writel(dma_init_reg[i].val,
base->virtbase + dma_init_reg[i].reg);

@@ -3184,11 +3331,14 @@ static void __init d40_hw_init(struct d40_base *base)
writel(activeo[0], base->virtbase + D40_DREG_ACTIVO);

/* Write which interrupt to enable */
- writel(pcmis, base->virtbase + D40_DREG_PCMIS);
+ writel(pcmis, base->virtbase + base->gen_dmac.interrupt_en);

/* Write which interrupt to clear */
- writel(pcicr, base->virtbase + D40_DREG_PCICR);
+ writel(pcicr, base->virtbase + base->gen_dmac.interrupt_clear);

+ /* These are __initdata and cannot be accessed after init */
+ base->gen_dmac.init_reg = NULL;
+ base->gen_dmac.init_reg_size = 0;
}

static int __init d40_lcla_allocate(struct d40_base *base)
diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h
index 6d47373..fdde8ef 100644
--- a/drivers/dma/ste_dma40_ll.h
+++ b/drivers/dma/ste_dma40_ll.h
@@ -125,7 +125,7 @@
#define D40_DREG_GCC 0x000
#define D40_DREG_GCC_ENA 0x1
/* This assumes that there are only 4 event groups */
-#define D40_DREG_GCC_ENABLE_ALL 0xff01
+#define D40_DREG_GCC_ENABLE_ALL 0x3ff01
#define D40_DREG_GCC_EVTGRP_POS 8
#define D40_DREG_GCC_SRC 0
#define D40_DREG_GCC_DST 1
@@ -148,14 +148,31 @@

#define D40_DREG_LCPA 0x020
#define D40_DREG_LCLA 0x024
+
+#define D40_DREG_SSEG1 0x030
+#define D40_DREG_SSEG2 0x034
+#define D40_DREG_SSEG3 0x038
+#define D40_DREG_SSEG4 0x03C
+
+#define D40_DREG_SCEG1 0x040
+#define D40_DREG_SCEG2 0x044
+#define D40_DREG_SCEG3 0x048
+#define D40_DREG_SCEG4 0x04C
+
#define D40_DREG_ACTIVE 0x050
#define D40_DREG_ACTIVO 0x054
-#define D40_DREG_FSEB1 0x058
-#define D40_DREG_FSEB2 0x05C
+#define D40_DREG_CIDMOD 0x058
+#define D40_DREG_TCIDV 0x05C
#define D40_DREG_PCMIS 0x060
#define D40_DREG_PCICR 0x064
#define D40_DREG_PCTIS 0x068
#define D40_DREG_PCEIS 0x06C
+
+#define D40_DREG_SPCMIS 0x070
+#define D40_DREG_SPCICR 0x074
+#define D40_DREG_SPCTIS 0x078
+#define D40_DREG_SPCEIS 0x07C
+
#define D40_DREG_LCMIS0 0x080
#define D40_DREG_LCMIS1 0x084
#define D40_DREG_LCMIS2 0x088
@@ -172,6 +189,33 @@
#define D40_DREG_LCEIS1 0x0B4
#define D40_DREG_LCEIS2 0x0B8
#define D40_DREG_LCEIS3 0x0BC
+
+#define D40_DREG_SLCMIS1 0x0C0
+#define D40_DREG_SLCMIS2 0x0C4
+#define D40_DREG_SLCMIS3 0x0C8
+#define D40_DREG_SLCMIS4 0x0CC
+
+#define D40_DREG_SLCICR1 0x0D0
+#define D40_DREG_SLCICR2 0x0D4
+#define D40_DREG_SLCICR3 0x0D8
+#define D40_DREG_SLCICR4 0x0DC
+
+#define D40_DREG_SLCTIS1 0x0E0
+#define D40_DREG_SLCTIS2 0x0E4
+#define D40_DREG_SLCTIS3 0x0E8
+#define D40_DREG_SLCTIS4 0x0EC
+
+#define D40_DREG_SLCEIS1 0x0F0
+#define D40_DREG_SLCEIS2 0x0F4
+#define D40_DREG_SLCEIS3 0x0F8
+#define D40_DREG_SLCEIS4 0x0FC
+
+#define D40_DREG_FSESS1 0x100
+#define D40_DREG_FSESS2 0x104
+
+#define D40_DREG_FSEBS1 0x108
+#define D40_DREG_FSEBS2 0x10C
+
#define D40_DREG_PSEG1 0x110
#define D40_DREG_PSEG2 0x114
#define D40_DREG_PSEG3 0x118
@@ -188,6 +232,86 @@
#define D40_DREG_RCEG2 0x144
#define D40_DREG_RCEG3 0x148
#define D40_DREG_RCEG4 0x14C
+
+#define D40_DREG_PREFOT 0x15C
+#define D40_DREG_EXTCFG 0x160
+
+#define D40_DREG_CPSEG1 0x200
+#define D40_DREG_CPSEG2 0x204
+#define D40_DREG_CPSEG3 0x208
+#define D40_DREG_CPSEG4 0x20C
+#define D40_DREG_CPSEG5 0x210
+
+#define D40_DREG_CPCEG1 0x220
+#define D40_DREG_CPCEG2 0x224
+#define D40_DREG_CPCEG3 0x228
+#define D40_DREG_CPCEG4 0x22C
+#define D40_DREG_CPCEG5 0x230
+
+#define D40_DREG_CRSEG1 0x240
+#define D40_DREG_CRSEG2 0x244
+#define D40_DREG_CRSEG3 0x248
+#define D40_DREG_CRSEG4 0x24C
+#define D40_DREG_CRSEG5 0x250
+
+#define D40_DREG_CRCEG1 0x260
+#define D40_DREG_CRCEG2 0x264
+#define D40_DREG_CRCEG3 0x268
+#define D40_DREG_CRCEG4 0x26C
+#define D40_DREG_CRCEG5 0x270
+
+#define D40_DREG_CFSESS1 0x280
+#define D40_DREG_CFSESS2 0x284
+#define D40_DREG_CFSESS3 0x288
+
+#define D40_DREG_CFSEBS1 0x290
+#define D40_DREG_CFSEBS2 0x294
+#define D40_DREG_CFSEBS3 0x298
+
+#define D40_DREG_CLCMIS1 0x300
+#define D40_DREG_CLCMIS2 0x304
+#define D40_DREG_CLCMIS3 0x308
+#define D40_DREG_CLCMIS4 0x30C
+#define D40_DREG_CLCMIS5 0x310
+
+#define D40_DREG_CLCICR1 0x320
+#define D40_DREG_CLCICR2 0x324
+#define D40_DREG_CLCICR3 0x328
+#define D40_DREG_CLCICR4 0x32C
+#define D40_DREG_CLCICR5 0x330
+
+#define D40_DREG_CLCTIS1 0x340
+#define D40_DREG_CLCTIS2 0x344
+#define D40_DREG_CLCTIS3 0x348
+#define D40_DREG_CLCTIS4 0x34C
+#define D40_DREG_CLCTIS5 0x350
+
+#define D40_DREG_CLCEIS1 0x360
+#define D40_DREG_CLCEIS2 0x364
+#define D40_DREG_CLCEIS3 0x368
+#define D40_DREG_CLCEIS4 0x36C
+#define D40_DREG_CLCEIS5 0x370
+
+#define D40_DREG_CPCMIS 0x380
+#define D40_DREG_CPCICR 0x384
+#define D40_DREG_CPCTIS 0x388
+#define D40_DREG_CPCEIS 0x38C
+
+#define D40_DREG_SCCIDA1 0xE80
+#define D40_DREG_SCCIDA2 0xE90
+#define D40_DREG_SCCIDA3 0xEA0
+#define D40_DREG_SCCIDA4 0xEB0
+#define D40_DREG_SCCIDA5 0xEC0
+
+#define D40_DREG_SCCIDB1 0xE84
+#define D40_DREG_SCCIDB2 0xE94
+#define D40_DREG_SCCIDB3 0xEA4
+#define D40_DREG_SCCIDB4 0xEB4
+#define D40_DREG_SCCIDB5 0xEC4
+
+#define D40_DREG_PRSCCIDA 0xF80
+#define D40_DREG_PRSCCIDB 0xF84
+
#define D40_DREG_STFU 0xFC8
#define D40_DREG_ICFG 0xFCC
#define D40_DREG_PERIPHID0 0xFE0
--
1.7.12.1


\
 
 \ /
  Last update: 2013-01-07 13:21    [W:0.086 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site