lkml.org 
[lkml]   [2013]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/8] dma: coh901318: remove hardcoded target addresses
Date
From: Linus Walleij <linus.walleij@linaro.org>

Nowadays the clients should use the dmaengine framework to
tell the DMA driver what target address to use, so delete
these addresses, they are for an out-of-tree driver anyway.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/dma/coh901318.c | 19 -------------------
1 file changed, 19 deletions(-)

diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c
index 06d9795..15e314a 100644
--- a/drivers/dma/coh901318.c
+++ b/drivers/dma/coh901318.c
@@ -23,7 +23,6 @@
#include <linux/debugfs.h>
#include <linux/platform_data/dma-coh901318.h>
#include <mach/coh901318.h>
-#include <mach/u300-regs.h>

#include "coh901318_lli.h"
#include "dmaengine.h"
@@ -99,13 +98,11 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_MSL_TX_0,
.name = "MSL TX 0",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20,
},
{
.number = U300_DMA_MSL_TX_1,
.name = "MSL TX 1",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20,
.param.config = COH901318_CX_CFG_CH_DISABLE |
COH901318_CX_CFG_LCR_DISABLE |
COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -157,7 +154,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_MSL_TX_2,
.name = "MSL TX 2",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20,
.param.config = COH901318_CX_CFG_CH_DISABLE |
COH901318_CX_CFG_LCR_DISABLE |
COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -210,7 +206,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_MSL_TX_3,
.name = "MSL TX 3",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20,
.param.config = COH901318_CX_CFG_CH_DISABLE |
COH901318_CX_CFG_LCR_DISABLE |
COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -262,7 +257,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_MSL_TX_4,
.name = "MSL TX 4",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20,
.param.config = COH901318_CX_CFG_CH_DISABLE |
COH901318_CX_CFG_LCR_DISABLE |
COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -314,25 +308,21 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_MSL_TX_5,
.name = "MSL TX 5",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20,
},
{
.number = U300_DMA_MSL_TX_6,
.name = "MSL TX 6",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20,
},
{
.number = U300_DMA_MSL_RX_0,
.name = "MSL RX 0",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220,
},
{
.number = U300_DMA_MSL_RX_1,
.name = "MSL RX 1",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220,
.param.config = COH901318_CX_CFG_CH_DISABLE |
COH901318_CX_CFG_LCR_DISABLE |
COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -371,7 +361,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_MSL_RX_2,
.name = "MSL RX 2",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220,
.param.config = COH901318_CX_CFG_CH_DISABLE |
COH901318_CX_CFG_LCR_DISABLE |
COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -423,7 +412,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_MSL_RX_3,
.name = "MSL RX 3",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220,
.param.config = COH901318_CX_CFG_CH_DISABLE |
COH901318_CX_CFG_LCR_DISABLE |
COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -475,7 +463,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_MSL_RX_4,
.name = "MSL RX 4",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220,
.param.config = COH901318_CX_CFG_CH_DISABLE |
COH901318_CX_CFG_LCR_DISABLE |
COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -527,7 +514,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_MSL_RX_5,
.name = "MSL RX 5",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220,
.param.config = COH901318_CX_CFG_CH_DISABLE |
COH901318_CX_CFG_LCR_DISABLE |
COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -579,7 +565,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_MSL_RX_6,
.name = "MSL RX 6",
.priority_high = 0,
- .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220,
},
/*
* Don't set up device address, burst count or size of src
@@ -715,7 +700,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_PCM_I2S0_TX,
.name = "PCM I2S0 TX",
.priority_high = 1,
- .dev_addr = U300_PCM_I2S0_BASE + 0x14,
.param.config = COH901318_CX_CFG_CH_DISABLE |
COH901318_CX_CFG_LCR_DISABLE |
COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -767,7 +751,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_PCM_I2S0_RX,
.name = "PCM I2S0 RX",
.priority_high = 1,
- .dev_addr = U300_PCM_I2S0_BASE + 0x10,
.param.config = COH901318_CX_CFG_CH_DISABLE |
COH901318_CX_CFG_LCR_DISABLE |
COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -819,7 +802,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_PCM_I2S1_TX,
.name = "PCM I2S1 TX",
.priority_high = 1,
- .dev_addr = U300_PCM_I2S1_BASE + 0x14,
.param.config = COH901318_CX_CFG_CH_DISABLE |
COH901318_CX_CFG_LCR_DISABLE |
COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -871,7 +853,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
.number = U300_DMA_PCM_I2S1_RX,
.name = "PCM I2S1 RX",
.priority_high = 1,
- .dev_addr = U300_PCM_I2S1_BASE + 0x10,
.param.config = COH901318_CX_CFG_CH_DISABLE |
COH901318_CX_CFG_LCR_DISABLE |
COH901318_CX_CFG_TC_IRQ_ENABLE |
--
1.7.11.3


\
 
 \ /
  Last update: 2013-01-07 00:21    [W:0.022 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site