lkml.org 
[lkml]   [2013]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 net-next] softirq: reduce latencies
From
Date
On Fri, 2013-01-04 at 00:23 -0800, Eric Dumazet wrote:
> On Fri, 2013-01-04 at 00:15 -0800, Joe Perches wrote:
> > Perhaps MAX_SOFTIRQ_TIME should be
> > #define MAX_SOFTIRQ_TIME msecs_to_jiffies(2)
> > though it would be nicer if it were a compile time constant.
>
> If you send a patch to convert msecs_to_jiffies() to an inline function
> when HZ = 1000, I will gladly use it instead of (2*HZ/1000)
>
> Right now, max(1, msecs_to_jiffies(2)) uses way too many instructions,
> while it should be the constant 2, known at compile time.

Something like this might work.

This is incomplete, it just does msecs_to_jiffies,
and it should convert usecs_to_jiffies and the
jiffies_to_<foo> types too.

Maybe it's worthwhile.

It does reduce object size by 16 bytes per call site
(x86-32) when the argument is a constant. There are
about 800 of these jiffies conversions in kernel sources.

What do you think?

include/linux/jiffies.h | 49 ++++++++++++++++++++++++++++++++++++++++++++++++-
kernel/time.c | 42 +++---------------------------------------
2 files changed, 51 insertions(+), 40 deletions(-)

diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 82ed068..c67ddcf 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -291,7 +291,54 @@ extern unsigned long preset_lpj;
*/
extern unsigned int jiffies_to_msecs(const unsigned long j);
extern unsigned int jiffies_to_usecs(const unsigned long j);
-extern unsigned long msecs_to_jiffies(const unsigned int m);
+extern unsigned long __msecs_to_jiffies(const unsigned int m);
+
+static inline unsigned long __inline_msecs_to_jiffies(const unsigned int m)
+{
+ /*
+ * Negative value, means infinite timeout:
+ */
+ if ((int)m < 0)
+ return MAX_JIFFY_OFFSET;
+
+#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
+ /*
+ * HZ is equal to or smaller than 1000, and 1000 is a nice
+ * round multiple of HZ, divide with the factor between them,
+ * but round upwards:
+ */
+ return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);
+#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
+ /*
+ * HZ is larger than 1000, and HZ is a nice round multiple of
+ * 1000 - simply multiply with the factor between them.
+ *
+ * But first make sure the multiplication result cannot
+ * overflow:
+ */
+ if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
+ return MAX_JIFFY_OFFSET;
+
+ return m * (HZ / MSEC_PER_SEC);
+#else
+ /*
+ * Generic case - multiply, round and divide. But first
+ * check that if we are doing a net multiplication, that
+ * we wouldn't overflow:
+ */
+ if (HZ > MSEC_PER_SEC && m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
+ return MAX_JIFFY_OFFSET;
+
+ return (MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32)
+ >> MSEC_TO_HZ_SHR32;
+#endif
+}
+
+#define msecs_to_jiffies(x) \
+ (__builtin_constant_p(x) ? \
+ __inline_msecs_to_jiffies(x) : \
+ __msecs_to_jiffies(x))
+
extern unsigned long usecs_to_jiffies(const unsigned int u);
extern unsigned long timespec_to_jiffies(const struct timespec *value);
extern void jiffies_to_timespec(const unsigned long jiffies,
diff --git a/kernel/time.c b/kernel/time.c
index d226c6a..231f2ac 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -425,47 +425,11 @@ EXPORT_SYMBOL(ns_to_timeval);
*
* We must also be careful about 32-bit overflows.
*/
-unsigned long msecs_to_jiffies(const unsigned int m)
+unsigned long __msecs_to_jiffies(const unsigned int m)
{
- /*
- * Negative value, means infinite timeout:
- */
- if ((int)m < 0)
- return MAX_JIFFY_OFFSET;
-
-#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
- /*
- * HZ is equal to or smaller than 1000, and 1000 is a nice
- * round multiple of HZ, divide with the factor between them,
- * but round upwards:
- */
- return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);
-#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
- /*
- * HZ is larger than 1000, and HZ is a nice round multiple of
- * 1000 - simply multiply with the factor between them.
- *
- * But first make sure the multiplication result cannot
- * overflow:
- */
- if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
- return MAX_JIFFY_OFFSET;
-
- return m * (HZ / MSEC_PER_SEC);
-#else
- /*
- * Generic case - multiply, round and divide. But first
- * check that if we are doing a net multiplication, that
- * we wouldn't overflow:
- */
- if (HZ > MSEC_PER_SEC && m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
- return MAX_JIFFY_OFFSET;
-
- return (MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32)
- >> MSEC_TO_HZ_SHR32;
-#endif
+ return __inline_msecs_to_jiffies(m);
}
-EXPORT_SYMBOL(msecs_to_jiffies);
+EXPORT_SYMBOL(__msecs_to_jiffies);

unsigned long usecs_to_jiffies(const unsigned int u)
{



\
 
 \ /
  Last update: 2013-01-04 10:41    [W:0.068 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site