lkml.org 
[lkml]   [2013]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 00/15] memory-hotplug: hot-remove physical memory
From
Date
On Fri, 2013-02-01 at 09:32 +0800, Jianguo Wu wrote:
> On 2013/1/31 18:38, Simon Jeons wrote:
>
> > Hi Tang,
> > On Thu, 2013-01-31 at 17:44 +0800, Tang Chen wrote:
> >> Hi Simon,
> >>
> >> On 01/31/2013 04:48 PM, Simon Jeons wrote:
> >>> Hi Tang,
> >>> On Thu, 2013-01-31 at 15:10 +0800, Tang Chen wrote:
> >>>
> >>> 1. IIUC, there is a button on machine which supports hot-remove memory,
> >>> then what's the difference between press button and echo to /sys?
> >>
> >> No important difference, I think. Since I don't have the machine you are
> >> saying, I cannot surely answer you. :)
> >> AFAIK, pressing the button means trigger the hotplug from hardware, sysfs
> >> is just another entrance. At last, they will run into the same code.
> >>
> >>> 2. Since kernel memory is linear mapping(I mean direct mapping part),
> >>> why can't put kernel direct mapping memory into one memory device, and
> >>> other memory into the other devices?
> >>
> >> We cannot do that because in that way, we will lose NUMA performance.
> >>
> >> If you know NUMA, you will understand the following example:
> >>
> >> node0: node1:
> >> cpu0~cpu15 cpu16~cpu31
> >> memory0~memory511 memory512~memory1023
> >>
> >> cpu16~cpu31 access memory16~memory1023 much faster than memory0~memory511.
> >> If we set direct mapping area in node0, and movable area in node1, then
> >> the kernel code running on cpu16~cpu31 will have to access
> >> memory0~memory511.
> >> This is a terrible performance down.
> >
> > So if config NUMA, kernel memory will not be linear mapping anymore? For
> > example,
> >
> > Node 0 Node 1
> >
> > 0 ~ 10G 11G~14G
> >
> > kernel memory only at Node 0? Can part of kernel memory also at Node 1?
> >
> > How big is kernel direct mapping memory in x86_64? Is there max limit?
>
>
> Max kernel direct mapping memory in x86_64 is 64TB.

For example, I have 8G memory, all of them will be direct mapping for
kernel? then userspace memory allocated from where?

>
> > It seems that only around 896MB on x86_32.
> >
> >>
> >>> As you know x86_64 don't need
> >>> highmem, IIUC, all kernel memory will linear mapping in this case. Is my
> >>> idea available? If is correct, x86_32 can't implement in the same way
> >>> since highmem(kmap/kmap_atomic/vmalloc) can map any address, so it's
> >>> hard to focus kernel memory on single memory device.
> >>
> >> Sorry, I'm not quite familiar with x86_32 box.
> >>
> >>> 3. In current implementation, if memory hotplug just need memory
> >>> subsystem and ACPI codes support? Or also needs firmware take part in?
> >>> Hope you can explain in details, thanks in advance. :)
> >>
> >> We need firmware take part in, such as SRAT in ACPI BIOS, or the firmware
> >> based memory migration mentioned by Liu Jiang.
> >
> > Is there any material about firmware based memory migration?
> >
> >>
> >> So far, I only know this. :)
> >>
> >>> 4. What's the status of memory hotplug? Apart from can't remove kernel
> >>> memory, other things are fully implementation?
> >>
> >> I think the main job is done for now. And there are still bugs to fix.
> >> And this functionality is not stable.
> >>
> >> Thanks. :)
> >
> >
> > --
> > To unsubscribe, send a message with 'unsubscribe linux-mm' in
> > the body to majordomo@kvack.org. For more info on Linux MM,
> > see: http://www.linux-mm.org/ .
> > Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
> >
> > .
> >
>
>
>




\
 
 \ /
  Last update: 2013-02-01 03:21    [W:0.101 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site