lkml.org 
[lkml]   [2013]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] Input: mouse: cyapa - Add support for cyapa smbus protocol
Date
This patch adds support for the Cypress APA Smbus Trackpad type,
which uses a modified register map that fits within the
limitations of the smbus protocol.

Devices that use this protocol include:
CYTRA-116001-00 - Samsung Series 5 550 Chromebook trackpad
CYTRA-103002-00 - Acer C7 Chromebook trackpad

Signed-off-by: Dudley Du <dudl@cypress.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
---
drivers/input/mouse/cyapa.c | 184 ++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 179 insertions(+), 5 deletions(-)

diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
index 1a14688..4ce0cb4 100644
--- a/drivers/input/mouse/cyapa.c
+++ b/drivers/input/mouse/cyapa.c
@@ -208,6 +208,7 @@ struct cyapa {
char phys[32]; /* device physical location */
int irq;
bool irq_wake; /* irq wake is enabled */
+ bool smbus;

/* read from query data region. */
char product_id[16];
@@ -229,6 +230,60 @@ struct cyapa_cmd_len {
u8 len;
};

+#define CYAPA_ADAPTER_FUNC_NONE 0
+#define CYAPA_ADAPTER_FUNC_I2C 1
+#define CYAPA_ADAPTER_FUNC_SMBUS 2
+#define CYAPA_ADAPTER_FUNC_BOTH 3
+
+/*
+ * macros for SMBus communication
+ */
+#define SMBUS_READ 0x01
+#define SMBUS_WRITE 0x00
+#define SMBUS_ENCODE_IDX(cmd, idx) ((cmd) | (((idx) & 0x03) << 1))
+#define SMBUS_ENCODE_RW(cmd, rw) ((cmd) | ((rw) & 0x01))
+#define SMBUS_BYTE_BLOCK_CMD_MASK 0x80
+#define SMBUS_GROUP_BLOCK_CMD_MASK 0x40
+
+ /* for byte read/write command */
+#define CMD_RESET 0
+#define CMD_POWER_MODE 1
+#define CMD_DEV_STATUS 2
+#define SMBUS_BYTE_CMD(cmd) (((cmd) & 0x3f) << 1)
+#define CYAPA_SMBUS_RESET SMBUS_BYTE_CMD(CMD_RESET)
+#define CYAPA_SMBUS_POWER_MODE SMBUS_BYTE_CMD(CMD_POWER_MODE)
+#define CYAPA_SMBUS_DEV_STATUS SMBUS_BYTE_CMD(CMD_DEV_STATUS)
+
+ /* for group registers read/write command */
+#define REG_GROUP_DATA 0
+#define REG_GROUP_CMD 2
+#define REG_GROUP_QUERY 3
+#define SMBUS_GROUP_CMD(grp) (0x80 | (((grp) & 0x07) << 3))
+#define CYAPA_SMBUS_GROUP_DATA SMBUS_GROUP_CMD(REG_GROUP_DATA)
+#define CYAPA_SMBUS_GROUP_CMD SMBUS_GROUP_CMD(REG_GROUP_CMD)
+#define CYAPA_SMBUS_GROUP_QUERY SMBUS_GROUP_CMD(REG_GROUP_QUERY)
+
+ /* for register block read/write command */
+#define CMD_BL_STATUS 0
+#define CMD_BL_HEAD 1
+#define CMD_BL_CMD 2
+#define CMD_BL_DATA 3
+#define CMD_BL_ALL 4
+#define CMD_BLK_PRODUCT_ID 5
+#define CMD_BLK_HEAD 6
+#define SMBUS_BLOCK_CMD(cmd) (0xc0 | (((cmd) & 0x1f) << 1))
+
+/* register block read/write command in bootloader mode */
+#define CYAPA_SMBUS_BL_STATUS SMBUS_BLOCK_CMD(CMD_BL_STATUS)
+#define CYAPA_SMBUS_BL_HEAD SMBUS_BLOCK_CMD(CMD_BL_HEAD)
+#define CYAPA_SMBUS_BL_CMD SMBUS_BLOCK_CMD(CMD_BL_CMD)
+#define CYAPA_SMBUS_BL_DATA SMBUS_BLOCK_CMD(CMD_BL_DATA)
+#define CYAPA_SMBUS_BL_ALL SMBUS_BLOCK_CMD(CMD_BL_ALL)
+
+/* register block read/write command in operational mode */
+#define CYAPA_SMBUS_BLK_PRODUCT_ID SMBUS_BLOCK_CMD(CMD_BLK_PRODUCT_ID)
+#define CYAPA_SMBUS_BLK_HEAD SMBUS_BLOCK_CMD(CMD_BLK_HEAD)
+
static const struct cyapa_cmd_len cyapa_i2c_cmds[] = {
{ CYAPA_OFFSET_SOFT_RESET, 1 },
{ REG_OFFSET_COMMAND_BASE + 1, 1 },
@@ -245,6 +300,22 @@ static const struct cyapa_cmd_len cyapa_i2c_cmds[] = {
{ REG_OFFSET_DATA_BASE, 32 }
};

+static const struct cyapa_cmd_len cyapa_smbus_cmds[] = {
+ { CYAPA_SMBUS_RESET, 1 },
+ { CYAPA_SMBUS_POWER_MODE, 1 },
+ { CYAPA_SMBUS_DEV_STATUS, 1 },
+ { CYAPA_SMBUS_GROUP_DATA, sizeof(struct cyapa_reg_data) },
+ { CYAPA_SMBUS_GROUP_CMD, 2 },
+ { CYAPA_SMBUS_GROUP_QUERY, QUERY_DATA_SIZE },
+ { CYAPA_SMBUS_BL_STATUS, 3 },
+ { CYAPA_SMBUS_BL_HEAD, 16 },
+ { CYAPA_SMBUS_BL_CMD, 16 },
+ { CYAPA_SMBUS_BL_DATA, 16 },
+ { CYAPA_SMBUS_BL_ALL, 32 },
+ { CYAPA_SMBUS_BLK_PRODUCT_ID, PRODUCT_ID_SIZE },
+ { CYAPA_SMBUS_BLK_HEAD, 16 },
+};
+
static ssize_t cyapa_i2c_reg_read_block(struct cyapa *cyapa, u8 reg, size_t len,
u8 *values)
{
@@ -257,26 +328,96 @@ static ssize_t cyapa_i2c_reg_write_block(struct cyapa *cyapa, u8 reg,
return i2c_smbus_write_i2c_block_data(cyapa->client, reg, len, values);
}

+/*
+ * cyapa_smbus_read_block - perform smbus block read command
+ * @cyapa - private data structure of the driver
+ * @cmd - the properly encoded smbus command
+ * @len - expected length of smbus command result
+ * @values - buffer to store smbus command result
+ *
+ * Returns negative errno, else the number of bytes written.
+ *
+ * Note:
+ * In trackpad device, the memory block allocated for I2C register map
+ * is 256 bytes, so the max read block for I2C bus is 256 bytes.
+ */
+static ssize_t cyapa_smbus_read_block(struct cyapa *cyapa, u8 cmd, size_t len,
+ u8 *values)
+{
+ ssize_t ret;
+ u8 index;
+ u8 smbus_cmd;
+ u8 *buf;
+ struct i2c_client *client = cyapa->client;
+ struct device *dev = &client->dev;
+
+ if (!(SMBUS_BYTE_BLOCK_CMD_MASK & cmd))
+ return -EINVAL;
+
+ if (SMBUS_GROUP_BLOCK_CMD_MASK & cmd) {
+ /* read specific block registers command. */
+ smbus_cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ);
+ ret = i2c_smbus_read_block_data(client, smbus_cmd, values);
+ goto out;
+ }
+
+ ret = 0;
+ for (index = 0; index * I2C_SMBUS_BLOCK_MAX < len; index++) {
+ smbus_cmd = SMBUS_ENCODE_IDX(cmd, index);
+ smbus_cmd = SMBUS_ENCODE_RW(smbus_cmd, SMBUS_READ);
+ buf = values + I2C_SMBUS_BLOCK_MAX * index;
+ ret = i2c_smbus_read_block_data(client, smbus_cmd, buf);
+ if (ret < 0)
+ goto out;
+ }
+
+out:
+
+ return (ret > 0) ? len : ret;
+}
+
static s32 cyapa_read_byte(struct cyapa *cyapa, u8 cmd_idx)
{
- u8 cmd = cyapa_i2c_cmds[cmd_idx].cmd;
+ struct device *dev = &cyapa->client->dev;
+ u8 cmd;

+ if (cyapa->smbus) {
+ cmd = cyapa_smbus_cmds[cmd_idx].cmd;
+ cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ);
+ } else {
+ cmd = cyapa_i2c_cmds[cmd_idx].cmd;
+ }
return i2c_smbus_read_byte_data(cyapa->client, cmd);
}

static s32 cyapa_write_byte(struct cyapa *cyapa, u8 cmd_idx, u8 value)
{
- u8 cmd = cyapa_i2c_cmds[cmd_idx].cmd;
+ struct device *dev = &cyapa->client->dev;
+ u8 cmd;

+ if (cyapa->smbus) {
+ cmd = cyapa_smbus_cmds[cmd_idx].cmd;
+ cmd = SMBUS_ENCODE_RW(cmd, SMBUS_WRITE);
+ } else {
+ cmd = cyapa_i2c_cmds[cmd_idx].cmd;
+ }
return i2c_smbus_write_byte_data(cyapa->client, cmd, value);
}

static ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values)
{
- u8 cmd = cyapa_i2c_cmds[cmd_idx].cmd;
- size_t len = cyapa_i2c_cmds[cmd_idx].len;
+ u8 cmd;
+ size_t len;

- return cyapa_i2c_reg_read_block(cyapa, cmd, len, values);
+ if (cyapa->smbus) {
+ cmd = cyapa_smbus_cmds[cmd_idx].cmd;
+ len = cyapa_smbus_cmds[cmd_idx].len;
+ return cyapa_smbus_read_block(cyapa, cmd, len, values);
+ } else {
+ cmd = cyapa_i2c_cmds[cmd_idx].cmd;
+ len = cyapa_i2c_cmds[cmd_idx].len;
+ return cyapa_i2c_reg_read_block(cyapa, cmd, len, values);
+ }
}

/*
@@ -298,6 +439,16 @@ static int cyapa_get_state(struct cyapa *cyapa)
*/
ret = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE,
status);
+
+ /*
+ * On smbus systems in OP mode, the i2c_reg_read will fail with
+ * -ETIMEDOUT. In this case, try again using the smbus equivalent
+ * command. This should return a BL_HEAD indicating CYAPA_STATE_OP.
+ */
+ if (cyapa->smbus && (ret == -ETIMEDOUT || ret == -ENXIO)) {
+ ret = cyapa_read_block(cyapa, CYAPA_CMD_BL_STATUS, status);
+ }
+
if (ret != BL_STATUS_SIZE)
goto error;

@@ -594,6 +745,19 @@ out:
return IRQ_HANDLED;
}

+static u8 cyapa_check_adapter_functionality(struct i2c_client *client)
+{
+ u8 ret = CYAPA_ADAPTER_FUNC_NONE;
+
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ ret |= CYAPA_ADAPTER_FUNC_I2C;
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK))
+ ret |= CYAPA_ADAPTER_FUNC_SMBUS;
+ return ret;
+}
+
static int cyapa_create_input_dev(struct cyapa *cyapa)
{
struct device *dev = &cyapa->client->dev;
@@ -668,9 +832,16 @@ static int cyapa_probe(struct i2c_client *client,
const struct i2c_device_id *dev_id)
{
int ret;
+ u8 adapter_func;
struct cyapa *cyapa;
struct device *dev = &client->dev;

+ adapter_func = cyapa_check_adapter_functionality(client);
+ if (adapter_func == CYAPA_ADAPTER_FUNC_NONE) {
+ dev_err(dev, "not a supported I2C/SMBus adapter\n");
+ return -EIO;
+ }
+
cyapa = kzalloc(sizeof(struct cyapa), GFP_KERNEL);
if (!cyapa) {
dev_err(dev, "allocate memory for cyapa failed\n");
@@ -683,6 +854,9 @@ static int cyapa_probe(struct i2c_client *client,
sprintf(cyapa->phys, "i2c-%d-%04x/input0", client->adapter->nr,
client->addr);

+ /* i2c isn't supported, set smbus */
+ if (adapter_func == CYAPA_ADAPTER_FUNC_SMBUS)
+ cyapa->smbus = true;
cyapa->state = CYAPA_STATE_NO_DEVICE;
ret = cyapa_check_is_operational(cyapa);
if (ret) {
--
1.8.1


\
 
 \ /
  Last update: 2013-02-01 00:42    [W:0.065 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site