lkml.org 
[lkml]   [2013]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 08/13] ARM: LPAE: factor out T1SZ and TTBR1 computations
Date
This patch moves the TTBR1 offset calculation and the T1SZ calculation out
of the TTB setup assembly code. This should not affect functionality in
any way, but improves code readability as well as readability of subsequent
patches in this series.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
---
arch/arm/include/asm/pgtable-3level-hwdef.h | 20 ++++++++++++++++++
arch/arm/mm/proc-v7-3level.S | 29 ++++++++-------------------
2 files changed, 28 insertions(+), 21 deletions(-)

diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h
index d795282..e9d70a3 100644
--- a/arch/arm/include/asm/pgtable-3level-hwdef.h
+++ b/arch/arm/include/asm/pgtable-3level-hwdef.h
@@ -74,4 +74,24 @@
#define PHYS_MASK_SHIFT (40)
#define PHYS_MASK ((1ULL << PHYS_MASK_SHIFT) - 1)

+/*
+ * TTBR0/TTBR1 split (PAGE_OFFSET):
+ * 0x40000000: T0SZ = 2, T1SZ = 0 (not used)
+ * 0x80000000: T0SZ = 0, T1SZ = 1
+ * 0xc0000000: T0SZ = 0, T1SZ = 2
+ *
+ * Only use this feature if PHYS_OFFSET <= PAGE_OFFSET, otherwise
+ * booting secondary CPUs would end up using TTBR1 for the identity
+ * mapping set up in TTBR0.
+ */
+#if defined CONFIG_VMSPLIT_2G
+#define TTBR1_OFFSET 16 /* skip two L1 entries */
+#elif defined CONFIG_VMSPLIT_3G
+#define TTBR1_OFFSET (4096 * (1 + 3)) /* only L2, skip pgd + 3*pmd */
+#else
+#define TTBR1_OFFSET 0
+#endif
+
+#define TTBR1_SIZE (((PAGE_OFFSET >> 30) - 1) << 16)
+
#endif
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
index e64be21..e6576f5 100644
--- a/arch/arm/mm/proc-v7-3level.S
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -113,7 +113,7 @@ ENDPROC(cpu_v7_set_pte_ext)
*/
.macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp
ldr \tmp, =swapper_pg_dir @ swapper_pg_dir virtual address
- cmp \ttbr1, \tmp @ PHYS_OFFSET > PAGE_OFFSET? (branch below)
+ cmp \ttbr1, \tmp @ PHYS_OFFSET > PAGE_OFFSET?
mrc p15, 0, \tmp, c2, c0, 2 @ TTB control register
orr \tmp, \tmp, #TTB_EAE
ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP)
@@ -121,27 +121,14 @@ ENDPROC(cpu_v7_set_pte_ext)
ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP << 16)
ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP << 16)
/*
- * TTBR0/TTBR1 split (PAGE_OFFSET):
- * 0x40000000: T0SZ = 2, T1SZ = 0 (not used)
- * 0x80000000: T0SZ = 0, T1SZ = 1
- * 0xc0000000: T0SZ = 0, T1SZ = 2
- *
- * Only use this feature if PHYS_OFFSET <= PAGE_OFFSET, otherwise
- * booting secondary CPUs would end up using TTBR1 for the identity
- * mapping set up in TTBR0.
+ * Only use split TTBRs if PHYS_OFFSET <= PAGE_OFFSET (cmp above),
+ * otherwise booting secondary CPUs would end up using TTBR1 for the
+ * identity mapping set up in TTBR0.
*/
- bhi 9001f @ PHYS_OFFSET > PAGE_OFFSET?
- orr \tmp, \tmp, #(((PAGE_OFFSET >> 30) - 1) << 16) @ TTBCR.T1SZ
-#if defined CONFIG_VMSPLIT_2G
- /* PAGE_OFFSET == 0x80000000, T1SZ == 1 */
- add \ttbr1, \ttbr1, #1 << 4 @ skip two L1 entries
-#elif defined CONFIG_VMSPLIT_3G
- /* PAGE_OFFSET == 0xc0000000, T1SZ == 2 */
- add \ttbr1, \ttbr1, #4096 * (1 + 3) @ only L2 used, skip pgd+3*pmd
-#endif
- /* CONFIG_VMSPLIT_1G does not need TTBR1 adjustment */
-9001: mcr p15, 0, \tmp, c2, c0, 2 @ TTB control register
- mcrr p15, 1, \ttbr1, \zero, c2 @ load TTBR1
+ orrls \tmp, \tmp, #TTBR1_SIZE @ TTBCR.T1SZ
+ mcr p15, 0, \tmp, c2, c0, 2 @ TTBCR
+ addls \ttbr1, \ttbr1, #TTBR1_OFFSET
+ mcrr p15, 1, \ttbr1, \zero, c2 @ load TTBR1
.endm

__CPUINIT
--
1.7.9.5


\
 
 \ /
  Last update: 2013-02-01 00:22    [W:0.166 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site