[lkml]   [2013]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/9] Support of Nexio 42" and new default class for hid-multitouch
Hi guys,

so, this is the v2 of the support of win7/8 devices.

changes since v1:
- removed the "optimization" patches, as the benefit was minimum
- introduce a new callback "report" in hid-core that drivers can use to treat the
report by having it entirely parsed
- rely on this new hook to support Nexio 42"

side notes:
- I've tested removing the heavy call to kzalloc in hid_input_field. The results
are disapointing -> the processing time remains the same.
- I've also tested not to rely on .event hook in hid-multitouch but only on .report.
Idem, I thought it would reduce the code of hid-multitouch and will enhance its
processing time, but the results are a roughly same number of lines for hid-multitouch
and the same processing time... :(
- these 2 tests helped in cleaning the patch set from the last time.

And again, finally, I've pass all the 40 regression tests of my db. \o/


Benjamin Tissoires (9):
HID: core: add "report" hook, called once the report has been parsed
HID: multitouch: use the callback "report" instead of sequential
HID: multitouch: add support for Nexio 42" panel
HID: multitouch: fix Win8 protocol for Sharp like devices
HID: multitouch: ensure that serial devices make no use of contact
HID: multitouch: fix protocol for Sitronix 1403:5001
HID: multitouch: fix protocol for Cando 2087:0a02
HID: multitouch: fix protocol for Elo panels
HID: multitouch: make MT_CLS_ALWAYS_TRUE the new default class

drivers/hid/hid-core.c | 4 ++
drivers/hid/hid-ids.h | 3 +
drivers/hid/hid-multitouch.c | 142 ++++++++++++++++++++++++++++++++-----------
include/linux/hid.h | 2 +
4 files changed, 115 insertions(+), 36 deletions(-)


 \ /
  Last update: 2013-01-31 18:02    [W:0.134 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site