lkml.org 
[lkml]   [2013]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/4] ACPI / scan: Introduce struct acpi_scan_handler
Date
On Tuesday, January 29, 2013 04:27:28 PM Toshi Kani wrote:
> On Wed, 2013-01-30 at 00:19 +0100, Rafael J. Wysocki wrote:
> > On Tuesday, January 29, 2013 03:57:10 PM Toshi Kani wrote:
> > > On Tue, 2013-01-29 at 22:32 +0100, Rafael J. Wysocki wrote:
> > > > On Tuesday, January 29, 2013 07:50:43 AM Toshi Kani wrote:
> > > > > On Tue, 2013-01-29 at 12:28 +0100, Rafael J. Wysocki wrote:
> > > > > > On Monday, January 28, 2013 07:35:39 PM Toshi Kani wrote:
> > > > > > > On Mon, 2013-01-28 at 13:59 +0100, Rafael J. Wysocki wrote:
> > > > > > > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > > > > > > >
> > > > > > > > Introduce struct acpi_scan_handler for representing objects that
> > > > > > > > will do configuration tasks depending on ACPI device nodes'
> > > > > > > > hardware IDs (HIDs).
> > > > > > > >
> > > > > > > > Currently, those tasks are done either directly by the ACPI namespace
> > > > > > > > scanning code or by ACPI device drivers designed specifically for
> > > > > > > > this purpose. None of the above is desirable, however, because
> > > > > > > > doing that directly in the namespace scanning code makes that code
> > > > > > > > overly complicated and difficult to follow and doing that in
> > > > > > > > "special" device drivers leads to a great deal of confusion about
> > > > > > > > their role and to confusing interactions with the driver core (for
> > > > > > > > example, sysfs directories are created for those drivers, but they
> > > > > > > > are completely unnecessary and only increase the kernel's memory
> > > > > > > > footprint in vain).
> > > > > > > >
> > > > > > > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > > > > > > > ---
> > > > > > > > Documentation/acpi/scan_handlers.txt | 77 +++++++++++++++++++++++++++++++++++
> > > > > > > > drivers/acpi/scan.c | 60 ++++++++++++++++++++++++---
> > > > > > > > include/acpi/acpi_bus.h | 14 ++++++
> > > > > > > > 3 files changed, 144 insertions(+), 7 deletions(-)
> > > > > > > >
> > > > > > > > Index: test/include/acpi/acpi_bus.h
> > > > > > > > ===================================================================
> > > > > > > > --- test.orig/include/acpi/acpi_bus.h
> > > > > > > > +++ test/include/acpi/acpi_bus.h
> > > > > > > > @@ -84,6 +84,18 @@ struct acpi_driver;
> > > > > > > > struct acpi_device;
> > > > > > > >
> > > > > > > > /*
> > > > > > > > + * ACPI Scan Handler
> > > > > > > > + * -----------------
> > > > > > > > + */
> > > > > > > > +
> > > > > > > > +struct acpi_scan_handler {
> > > > > > > > + const struct acpi_device_id *ids;
> > > > > > > > + struct list_head list_node;
> > > > > > > > + int (*attach)(struct acpi_device *dev, const struct acpi_device_id *id);
> > > > > > > > + void (*detach)(struct acpi_device *dev);
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +/*
> > > > > > > > * ACPI Driver
> > > > > > > > * -----------
> > > > > > > > */
> > > > > > > > @@ -269,6 +281,7 @@ struct acpi_device {
> > > > > > > > struct acpi_device_wakeup wakeup;
> > > > > > > > struct acpi_device_perf performance;
> > > > > > > > struct acpi_device_dir dir;
> > > > > > > > + struct acpi_scan_handler *handler;
> > > > > > > > struct acpi_driver *driver;
> > > > > > > > void *driver_data;
> > > > > > > > struct device dev;
> > > > > > > > @@ -382,6 +395,7 @@ int acpi_bus_receive_event(struct acpi_b
> > > > > > > > static inline int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data)
> > > > > > > > { return 0; }
> > > > > > > > #endif
> > > > > > > > +int acpi_scan_add_handler(struct acpi_scan_handler *handler);
> > > > > > > > int acpi_bus_register_driver(struct acpi_driver *driver);
> > > > > > > > void acpi_bus_unregister_driver(struct acpi_driver *driver);
> > > > > > > > int acpi_bus_scan(acpi_handle handle);
> > > > > > > > Index: test/drivers/acpi/scan.c
> > > > > > > > ===================================================================
> > > > > > > > --- test.orig/drivers/acpi/scan.c
> > > > > > > > +++ test/drivers/acpi/scan.c
> > > > > > > > @@ -53,6 +53,7 @@ static const struct acpi_device_id acpi_
> > > > > > > > static LIST_HEAD(acpi_device_list);
> > > > > > > > static LIST_HEAD(acpi_bus_id_list);
> > > > > > > > static DEFINE_MUTEX(acpi_scan_lock);
> > > > > > > > +static LIST_HEAD(acpi_scan_handlers_list);
> > > > > > > > DEFINE_MUTEX(acpi_device_lock);
> > > > > > > > LIST_HEAD(acpi_wakeup_device_list);
> > > > > > > >
> > > > > > > > @@ -62,6 +63,15 @@ struct acpi_device_bus_id{
> > > > > > > > struct list_head node;
> > > > > > > > };
> > > > > > > >
> > > > > > > > +int acpi_scan_add_handler(struct acpi_scan_handler *handler)
> > > > > > > > +{
> > > > > > > > + if (!handler || !handler->attach)
> > > > > > > > + return -EINVAL;
> > > > > > > > +
> > > > > > > > + list_add_tail(&handler->list_node, &acpi_scan_handlers_list);
> > > > > > > > + return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > /*
> > > > > > > > * Creates hid/cid(s) string needed for modalias and uevent
> > > > > > > > * e.g. on a device with hid:IBM0001 and cid:ACPI0001 you get:
> > > > > > > > @@ -1570,20 +1580,42 @@ static acpi_status acpi_bus_check_add(ac
> > > > > > > > return AE_OK;
> > > > > > > > }
> > > > > > > >
> > > > > > > > +static int acpi_scan_attach_handler(struct acpi_device *device)
> > > > > > > > +{
> > > > > > > > + struct acpi_scan_handler *handler;
> > > > > > > > + int ret = 0;
> > > > > > > > +
> > > > > > > > + list_for_each_entry(handler, &acpi_scan_handlers_list, list_node) {
> > > > > > > > + const struct acpi_device_id *id;
> > > > > > > > +
> > > > > > > > + id = __acpi_match_device(device, handler->ids);
> > > > > > > > + if (!id)
> > > > > > > > + continue;
> > > > > > > > +
> > > > > > > > + ret = handler->attach(device, id);
> > > > > > > > + if (ret > 0) {
> > > > > > > > + device->handler = handler;
> > > > > > > > + break;
> > > > > > > > + } else if (ret < 0) {
> > > > > > > > + break;
> > > > > > > > + }
> > > > > > > > + }
> > > > > > > > + return ret;
> > > > > > > > +}
> > > > > > >
> > > > > > > Now that we have full control over the attach logic, it would be great
> > > > > > > if we can update it to match with the ACPI spec -- HID has priority over
> > > > > > > CIDs, and CIDs are also listed in their priority. For example, Device-X
> > > > > > > has HID and CID. In this case, this Device-X should be attached to
> > > > > > > Handler-A since it supports HID. The current logic simply chooses a
> > > > > > > handler whichever registered before.
> > > > > > >
> > > > > > > Device-X: HID PNPID-A, CID PNPID-B
> > > > > > > Handler-A: PNPID-A
> > > > > > > Handler-B: PNPID-B
> > > > > > >
> > > > > > > So, the attach logic should be something like:
> > > > > > >
> > > > > > > list_for_each_entry(hwid, acpi_device->pnp.ids,) {
> > > > > > > list_for_each_entry(,&acpi_scan_handlers_list,)
> > > > > > > check if this handler supports a given hwid
> > > > > > > }
> > > > > >
> > > > > > OK, I see the problem, but I think it's better to address it in a separate
> > > > > > patch on top of the current series.
> > > > >
> > > > > I agree.
> > > > >
> > > > > > I'm not sure what approach is best, though. Do you think there should be two
> > > > > > passes the first of which will check HIDs only and the second one will check
> > > > > > CIDs? Or do you have something different in mind?
> > > > >
> > > > > HID and CIDs are already listed in their priority order in
> > > > > acpi_device->pnp.ids. So, the single pass like I described above should
> > > > > work.
> > > >
> > > > Well, I'm not sure if I understand you correctly.
> > > >
> > > > The device is given and we need to find a handler for it. So, it looks like
> > > > we first should check if any handler matches the HID. This has to be a pass
> > > > through all handlers. If there's no match, we need to check if any handler
> > > > matches any of the device IDs. That will be the second pass, won't it?
> > >
> > > acpi_device->pnp.ids has a list of HID->CID[0]->CID[1]..CID[n] since
> > > acpi_device_set_id() checks HID before CIDs. So, the first pass is to
> > > check with the first entry of pnp.ids. If no handler is found, then
> > > check the second entry, and so on.
> >
> > I'd prefer to check HID and then all CIDs at once in accordance with the
> > following rule:
> > 1) Use the first handler that matches HID exactly. If there's none:
> > 2) Use the first handler compatible with the given device.
>
> What do you mean by all CIDs at once? CIDs also have priority when
> there are multiple CIDs. That is, CID[0] takes priority over CID[1].
> So, going down the pnp.ids list handles the ordering correctly.

OK, I see what you mean now.

> > > > The difficulty is that the first item in pnp.ids need not be *the* HID.
> > > > It only will be the HID if ACPI_VALID_HID is set in the device info in
> > > > acpi_device_set_id(). So perhaps we need to add a hid_valid bit in
> > > > device->flags and only do the "HID pass" if that is set?
> > >
> > > I do not think such bit is necessary for this. _HID is required (unless
> > > it has _ADR), but _CID is optional. So, the valid cases are that a
> > > device object has HID only, has both HID and CID(s), or has none of them
> > > (i.e. _ADR device). If there is a device with CID only, this is a FW
> > > bug and we just have to check with CID then.
> >
> > In addition to that there's a number of objects that we assign artificial HIDs.
> > I think we should treat them as CIDs rather than as real HIDs in this regard.
>
> When an object does not support the _HID/_CID combination, it means that
> this type of objects can only support a single characteristic, which is
> the same as a device object with HID only. Therefore, an artificial ID
> should be considered as an HID.

I'm not sure about that, but it shouldn't really matter a lot anyway. :-)

Thanks,
Rafael


--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.


\
 
 \ /
  Last update: 2013-01-30 15:01    [W:0.138 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site