lkml.org 
[lkml]   [2013]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND 2/2] usb: host: tegra: Resetting PORT0 based on information received via DT.
Date
Tegra USB host driver is using port instance number,
to handle some of the hardware issues on SOC e.g. reset PORT0
twice etc. As instance number based handling looks ugly,
making use of information passed through DT for achieving this.

Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
drivers/usb/host/ehci-tegra.c | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index acf1755..55a9cde 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -43,6 +43,7 @@ struct tegra_ehci_hcd {
struct usb_phy *transceiver;
int host_resumed;
int port_resuming;
+ bool needs_double_reset;
enum tegra_usb_phy_port_speed port_speed;
};

@@ -184,7 +185,7 @@ static int tegra_ehci_hub_control(
}

/* For USB1 port we need to issue Port Reset twice internally */
- if (tegra->phy->instance == 0 &&
+ if (tegra->needs_double_reset &&
(typeReq == SetPortFeature && wValue == USB_PORT_FEAT_RESET)) {
spin_unlock_irqrestore(&ehci->lock, flags);
return tegra_ehci_internal_port_reset(ehci, status_reg);
@@ -666,6 +667,9 @@ static int tegra_ehci_probe(struct platform_device *pdev)
clk_prepare_enable(tegra->emc_clk);
clk_set_rate(tegra->emc_clk, 400000000);

+ tegra->needs_double_reset = of_property_read_bool(pdev->dev.of_node,
+ "nvidia,needs-double-reset");
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Failed to get I/O memory\n");
--
1.7.0.4


\
 
 \ /
  Last update: 2013-01-03 09:21    [W:0.061 / U:0.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site