lkml.org 
[lkml]   [2013]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RFC v2] media: tvp514x: add OF support
Date
From: Lad, Prabhakar <prabhakar.lad@ti.com>

add OF support for the tvp514x driver.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
Changes for v2:
1: Fixed review comment pointed by Heiko.
2: Fixed review comment pointed by Laurent.

This patch is on top of following patches:
1: https://patchwork.kernel.org/patch/1930941/
2: http://patchwork.linuxtv.org/patch/16193/
3: https://patchwork.kernel.org/patch/1944901

.../devicetree/bindings/media/i2c/tvp514x.txt | 38 +++++++++++
drivers/media/i2c/tvp514x.c | 70 ++++++++++++++++++--
2 files changed, 103 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp514x.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
new file mode 100644
index 0000000..55d3ffd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
@@ -0,0 +1,38 @@
+* Texas Instruments TVP514x video decoder
+
+The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip
+digital video decoder that digitizes and decodes all popular baseband analog
+video formats into digital video component. The tvp514x decoder supports analog-
+to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D
+conversion and decoding of NTSC, PAL and SECAM composite and S-video into
+component YCbCr.
+
+Required Properties :
+- compatible: Must be "ti,tvp514x-decoder"
+- hsync-active: HSYNC Polarity configuration for current interface.
+- vsync-active: VSYNC Polarity configuration for current interface.
+- data-active: Clock polarity of the current interface.
+
+Example:
+
+i2c0@1c22000 {
+ ...
+ ...
+
+ tvp514x@5c {
+ compatible = "ti,tvp514x-decoder";
+ reg = <0x5c>;
+
+ port {
+ tvp514x_1: endpoint {
+ /* Active high (Defaults to 0) */
+ hsync-active = <1>;
+ /* Active high (Defaults to 0) */
+ hsync-active = <1>;
+ /* Active low (Defaults to 0) */
+ data-active = <0>;
+ };
+ };
+ };
+ ...
+};
diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c
index a4f0a70..24ce759 100644
--- a/drivers/media/i2c/tvp514x.c
+++ b/drivers/media/i2c/tvp514x.c
@@ -12,6 +12,7 @@
* Hardik Shah <hardik.shah@ti.com>
* Manjunath Hadli <mrh@ti.com>
* Karicheri Muralidharan <m-karicheri2@ti.com>
+ * Prabhakar Lad <prabhakar.lad@ti.com>
*
* This package is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -33,7 +34,9 @@
#include <linux/delay.h>
#include <linux/videodev2.h>
#include <linux/module.h>
+#include <linux/of_device.h>

+#include <media/v4l2-of.h>
#include <media/v4l2-async.h>
#include <media/v4l2-device.h>
#include <media/v4l2-common.h>
@@ -930,6 +933,58 @@ static struct tvp514x_decoder tvp514x_dev = {

};

+#if defined(CONFIG_OF)
+static const struct of_device_id tvp514x_of_match[] = {
+ {.compatible = "ti,tvp514x-decoder", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, tvp514x_of_match);
+
+static struct tvp514x_platform_data
+ *tvp514x_get_pdata(struct i2c_client *client)
+{
+ if (!client->dev.platform_data && client->dev.of_node) {
+ struct tvp514x_platform_data *pdata;
+ struct v4l2_of_endpoint bus_cfg;
+ struct device_node *endpoint;
+
+ pdata = devm_kzalloc(&client->dev,
+ sizeof(struct tvp514x_platform_data),
+ GFP_KERNEL);
+ client->dev.platform_data = pdata;
+ if (!pdata)
+ return NULL;
+
+ endpoint = of_get_child_by_name(client->dev.of_node, "port");
+ if (endpoint)
+ endpoint = of_get_child_by_name(endpoint, "endpoint");
+
+ if (!endpoint) {
+ v4l2_info(client, "Using default data!!\n");
+ } else {
+ v4l2_of_parse_parallel_bus(endpoint, &bus_cfg);
+
+ if (bus_cfg.mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
+ pdata->hs_polarity = 1;
+ if (bus_cfg.mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
+ pdata->vs_polarity = 1;
+ if (bus_cfg.mbus_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
+ pdata->clk_polarity = 1;
+ }
+ }
+
+ return client->dev.platform_data;
+}
+#else
+#define tvp514x_of_match NULL
+
+static struct tvp514x_platform_data
+ *tvp514x_get_pdata(struct i2c_client *client)
+{
+ return client->dev.platform_data;
+}
+#endif
+
/**
* tvp514x_probe() - decoder driver i2c probe handler
* @client: i2c driver client device structure
@@ -941,6 +996,7 @@ static struct tvp514x_decoder tvp514x_dev = {
static int
tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
+ struct tvp514x_platform_data *pdata;
struct tvp514x_decoder *decoder;
struct v4l2_subdev *sd;
int ret;
@@ -949,22 +1005,25 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;

+ pdata = tvp514x_get_pdata(client);
+ if (!pdata) {
+ v4l2_err(client, "No platform data!!\n");
+ return -EPROBE_DEFER;
+ }
+
decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL);
if (!decoder)
return -ENOMEM;

/* Initialize the tvp514x_decoder with default configuration */
*decoder = tvp514x_dev;
- if (!client->dev.platform_data) {
- v4l2_err(client, "No platform data!!\n");
- return -EPROBE_DEFER;
- }
+
/* Copy default register configuration */
memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default,
sizeof(tvp514x_reg_list_default));

/* Copy board specific information here */
- decoder->pdata = client->dev.platform_data;
+ decoder->pdata = pdata;

/**
* Fetch platform specific data, and configure the
@@ -1096,6 +1155,7 @@ MODULE_DEVICE_TABLE(i2c, tvp514x_id);

static struct i2c_driver tvp514x_driver = {
.driver = {
+ .of_match_table = tvp514x_of_match,
.owner = THIS_MODULE,
.name = TVP514X_MODULE_NAME,
},
--
1.7.4.1


\
 
 \ /
  Last update: 2013-01-29 14:43    [W:0.092 / U:0.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site