lkml.org 
[lkml]   [2013]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] DaVinci: da850: Add NOR flash DT node support
Date
Add NOR flash DT node support for DA850 EVM and related pin mux.
Configure 16 bit data bus width for CS2(aemif) to use the norflash on
DA850.

This series is based on top of 3.8-rc4 and the following patches.

-drivers/pinctrl: grab default handles from device core
https://patchwork.kernel.org/patch/1862231/
-ARM: davinci: da850: add pinctrl driver DT entries

Tested on DA850 EVM.

Kumar, Anil (2):
ARM: davinci: da850 evm: add norflash DT node
ARM: davinci: da850: configure CS2(aemif) for norflash

arch/arm/boot/dts/da850-evm.dts | 25 +++++++++++++++++++++++
arch/arm/boot/dts/da850.dtsi | 41 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-davinci/da8xx-dt.c | 17 +++++++++++++++
3 files changed, 83 insertions(+), 0 deletions(-)

--
1.7.4.1



\
 
 \ /
  Last update: 2013-01-29 07:01    [W:0.106 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site