lkml.org 
[lkml]   [2013]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] ARM: ux500: select the DB8540 pin controller
Date
From: Linus Walleij <linus.walleij@linaro.org>

The pin controller is an inherent part of the SoC, without
it the system will not boot, thus it needs to be selected
from Kconfig.

Cc: arm@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Requesting ACK from ARM SoC on this patch.
---
arch/arm/mach-ux500/Kconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 5a12a7a..3e5bbd0 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -19,6 +19,7 @@ config UX500_SOC_DB8500
select CPU_FREQ_TABLE if CPU_FREQ
select MFD_DB8500_PRCMU
select PINCTRL_DB8500
+ select PINCTRL_DB8540
select PINCTRL_AB8500
select PINCTRL_AB8505
select PINCTRL_AB9540
--
1.7.11.3


\
 
 \ /
  Last update: 2013-01-28 16:41    [W:0.040 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site