lkml.org 
[lkml]   [2013]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/4] usb: phy: samsung: Enable runtime power management on samsung-usb3
On Mon, Jan 28, 2013 at 06:54:42PM +0530, Vivek Gautam wrote:
> Hi Felipe,
>
>
> On Mon, Jan 28, 2013 at 6:37 PM, Felipe Balbi <balbi@ti.com> wrote:
> > Hi,
> >
> > On Mon, Jan 28, 2013 at 06:34:15PM +0530, Vivek Gautam wrote:
> >> >> @@ -65,7 +67,22 @@ static u32 samsung_usb3_phy_set_refclk(struct samsung_usbphy *sphy)
> >> >> return reg;
> >> >> }
> >> >>
> >> >> -static int samsung_exynos5_usb3_phy_enable(struct samsung_usbphy *sphy)
> >> >> +/*
> >> >> + * Sets the phy clk as ref_pad_clk (XusbXTI) which is clock from external PLL.
> >> >> + */
> >> >> +static u32 samsung_usb3_phy_set_refclk_ext(void)
> >> >> +{
> >> >> + u32 reg;
> >> >> +
> >> >> + reg = PHYCLKRST_REFCLKSEL_PAD_REFCLK |
> >> >> + PHYCLKRST_FSEL_PAD_100MHZ |
> >> >> + PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF;
> >> >> +
> >> >> + return reg;
> >> >> +}
> >> >
> >> > I wonder if you really need this small function (likewise for
> >> > set_refclk_int()). They don't do much, so you could just inline them on
> >> > the only caller.
> >> >
> >>
> >> Created this just to keep symmetry, ;-)
> >> will move this in the caller only.
> >
> > you can have a patch before this series moving the refclk_int() to the
> > caller, then you will have symmetry ;-)
> >
>
> refclk_int() was rather slightly a big chunk :-(
> as available in below patch as samsung_usb3_phy_set_refclk() :
> [PATCH v4 2/2] usb: phy: samsung: Add PHY support for USB 3.0 controller
> http://www.mail-archive.com/linux-usb@vger.kernel.org/msg13796.html
>
> Will try to figure best possible way and amend.

oh, right... In that case, keep the way it is. Ignore my comment ;-)

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-01-28 15:02    [W:0.175 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site