lkml.org 
[lkml]   [2013]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] usb: dwc3/xhci: Enable runtime power management
Date
This patch-series enables runtime power management on xhci-plat,
dwc3-core, dwc3-exynos as well as on samsung-usb3 type PHY.
This allows usb 3.0 host ports to be power managed at runtime.
We also turn off the PHY ref_clk PLL, which supplies reference clock
to USB3 type phy, when ports are not in use.

This patch-series is based on 'usb-next' with follwing patches:

usb: phy: samsung: Introducing usb phy driver for hsotg
usb: phy: s3c-hsotg: adding phy driver support

usb: phy: samsung: Add support to set pmu isolation
ARM: EXYNOS: Update & move usb-phy types to generic include layer
usb: phy: samsung: Add host phy support to samsung-phy driver
USB: ehci-s5p: Add phy driver support
USB: ohci-exynos: Add phy driver support
usb: phy: samsung: Remove __devinit, __devexit_p and __exit annotations

[PATCH v4 1/2] usb: phy: samsung: Common out the generic stuff
[PATCH v4 2/2] usb: phy: samsung: Add PHY support for USB 3.0 controller

Vivek Gautam (4):
usb: xhci: Enable runtime pm in xhci-plat
USB: dwc3: Adjust runtime pm the dwc3 driver to allow runtime suspend
usb: dwc3: exynos: Enable runtime power management
usb: phy: samsung: Enable runtime power management on samsung-usb3

drivers/usb/dwc3/core.c | 4 +-
drivers/usb/dwc3/dwc3-exynos.c | 47 +++++++++++++++++
drivers/usb/host/xhci-plat.c | 9 +++
drivers/usb/phy/samsung-usb3.c | 107 +++++++++++++++++++++++++++++++++++--
drivers/usb/phy/samsung-usbphy.c | 26 +++++++++
drivers/usb/phy/samsung-usbphy.h | 1 +
6 files changed, 187 insertions(+), 7 deletions(-)

--
1.7.6.5



\
 
 \ /
  Last update: 2013-01-28 14:21    [W:0.111 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site