lkml.org 
[lkml]   [2013]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 12/30] usb: ehci-omap: Remove PHY regulator handling code
Date
PHY regulator handling must be done in the PHY driver

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/usb/host/ehci-omap.c | 34 ----------------------------------
1 files changed, 0 insertions(+), 34 deletions(-)

diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 3c63619..da3e322 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -42,7 +42,6 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/usb/ulpi.h>
-#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/gpio.h>
#include <linux/clk.h>
@@ -112,19 +111,6 @@ static int omap_ehci_init(struct usb_hcd *hcd)
return rc;
}

-static void disable_put_regulator(
- struct usbhs_omap_platform_data *pdata)
-{
- int i;
-
- for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
- if (pdata->regulator[i]) {
- regulator_disable(pdata->regulator[i]);
- regulator_put(pdata->regulator[i]);
- }
- }
-}
-
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */

@@ -153,7 +139,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
int ret = -ENODEV;
int irq;
int i;
- char supply[7];

if (usb_disabled())
return -ENODEV;
@@ -221,23 +206,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
usb_phy_set_suspend(omap->phy[i], 0);
}

- /* get ehci regulator and enable */
- for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
- if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
- pdata->regulator[i] = NULL;
- continue;
- }
- snprintf(supply, sizeof(supply), "hsusb%d", i);
- pdata->regulator[i] = regulator_get(dev, supply);
- if (IS_ERR(pdata->regulator[i])) {
- pdata->regulator[i] = NULL;
- dev_dbg(dev,
- "failed to get ehci port%d regulator\n", i);
- } else {
- regulator_enable(pdata->regulator[i]);
- }
- }
-
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);

@@ -263,7 +231,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
return 0;

err_pm_runtime:
- disable_put_regulator(pdata);
pm_runtime_put_sync(dev);

err_phy:
@@ -294,7 +261,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
int i;

usb_remove_hcd(hcd);
- disable_put_regulator(dev->platform_data);
usb_put_hcd(hcd);

for (i = 0; i < omap->nports; i++) {
--
1.7.4.1


\
 
 \ /
  Last update: 2013-01-28 13:21    [W:0.380 / U:1.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site