lkml.org 
[lkml]   [2013]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2]linux-usb:Define a new macro for USB storage match rules
Hello.

On 25-01-2013 6:44, fangxiaozhi 00110321 wrote:

> From: fangxiaozhi <huananhu@huawei.com>

> 1. Define a new macro for USB storage match rules:
> matching with Vendor ID and interface descriptors.

> Signed-off-by: fangxiaozhi <huananhu@huawei.com>
> --------------------------------------------------------------------
>
> diff -uprN linux-3.8-rc4_orig/drivers/usb/storage/usb.c linux-3.8-rc4/drivers/usb/storage/usb.c
> --- linux-3.8-rc4_orig/drivers/usb/storage/usb.c 2013-01-22 14:12:42.595238727 +0800
> +++ linux-3.8-rc4/drivers/usb/storage/usb.c 2013-01-22 14:16:01.398250305 +0800
> @@ -120,6 +120,17 @@ MODULE_PARM_DESC(quirks, "supplemental l
> .useTransport = use_transport, \
> }
>
> +#define UNUSUAL_VENDOR_INTF(idVendor, cl, sc, pr, \
> + vendor_name, product_name, use_protocol, use_transport, \
> + init_function, Flags) \
> +{ \
> + .vendorName = vendor_name, \
> + .productName = product_name, \
> + .useProtocol = use_protocol, \
> + .useTransport = use_transport, \
> + .initFunction = init_function, \
> +}

Shouldn't the field initilaizers be indented with tab, not space?

> diff -uprN linux-3.8-rc4_orig/drivers/usb/storage/usual-tables.c linux-3.8-rc4/drivers/usb/storage/usual-tables.c
> --- linux-3.8-rc4_orig/drivers/usb/storage/usual-tables.c 2013-01-22 14:12:42.594238726 +0800
> +++ linux-3.8-rc4/drivers/usb/storage/usual-tables.c 2013-01-22 14:16:01.426250199 +0800
> @@ -41,6 +41,19 @@
> #define USUAL_DEV(useProto, useTrans) \
> { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans) }
>
> +/* Define the device is matched with Vendor ID and interface descriptors */
> +#define UNUSUAL_VENDOR_INTF(id_vendor, cl, sc, pr, \
> + vendorName, productName, useProtocol, useTransport, \
> + initFunction, flags) \
> +{ \
> + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO \
> + | USB_DEVICE_ID_MATCH_VENDOR, \
> + .idVendor = (id_vendor), \
> + .bInterfaceClass = (cl), \
> + .bInterfaceSubClass = (sc), \
> + .bInterfaceProtocol = (pr), \
> + .driver_info = (flags) }

Same question. And trailing '}' should be on a separate line.

WBR, Sergei



\
 
 \ /
  Last update: 2013-01-25 17:01    [W:0.576 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site