lkml.org 
[lkml]   [2013]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/2] usb: phy: omap-usb2: enable 960Mhz clock for omap5
Date
"usb_otg_ss_refclk960m" is needed for usb2 phy present in omap5. For
omap4, the clk_get of this clock will fail since it does not have this
clock.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/usb/phy/omap-usb2.c | 28 +++++++++++++++++++++++++++-
1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c
index 0cd88ac..844ab68 100644
--- a/drivers/usb/phy/omap-usb2.c
+++ b/drivers/usb/phy/omap-usb2.c
@@ -166,6 +166,12 @@ static int omap_usb2_probe(struct platform_device *pdev)
}
clk_prepare(phy->wkupclk);

+ phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
+ if (IS_ERR(phy->optclk))
+ dev_vdbg(&pdev->dev, "unable to get refclk960m\n");
+ else
+ clk_prepare(phy->optclk);
+
usb_add_phy_dev(&phy->phy);

platform_set_drvdata(pdev, phy);
@@ -180,6 +186,8 @@ static int omap_usb2_remove(struct platform_device *pdev)
struct omap_usb *phy = platform_get_drvdata(pdev);

clk_unprepare(phy->wkupclk);
+ if (!IS_ERR(phy->optclk))
+ clk_unprepare(phy->optclk);
usb_remove_phy(&phy->phy);

return 0;
@@ -193,6 +201,8 @@ static int omap_usb2_runtime_suspend(struct device *dev)
struct omap_usb *phy = platform_get_drvdata(pdev);

clk_disable(phy->wkupclk);
+ if (!IS_ERR(phy->optclk))
+ clk_disable(phy->optclk);

return 0;
}
@@ -204,9 +214,25 @@ static int omap_usb2_runtime_resume(struct device *dev)
struct omap_usb *phy = platform_get_drvdata(pdev);

ret = clk_enable(phy->wkupclk);
- if (ret < 0)
+ if (ret < 0) {
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
+ goto err0;
+ }
+
+ if (!IS_ERR(phy->optclk)) {
+ ret = clk_enable(phy->optclk);
+ if (ret < 0) {
+ dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
+ goto err1;
+ }
+ }
+
+ return 0;
+
+err1:
+ clk_disable(phy->wkupclk);

+err0:
return ret;
}

--
1.7.9.5


\
 
 \ /
  Last update: 2013-01-25 14:21    [W:0.034 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site