lkml.org 
[lkml]   [2013]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[ 02/22] libata: ahci: Add support for Enmotus Bobcat device.
Date
3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugh Daschbach <hugh.daschbach@enmotus.com>

commit 7f9c9f8e24590e7dcd26ca408458c43df5b83e61 upstream.

Silicon does not support standard AHCI BAR assignment. Add
vendor/device exception to force BAR 2.

Signed-off-by: Hugh Daschbach <hugh.daschbach@enmotus.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/ata/ahci.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -53,6 +53,7 @@

enum {
AHCI_PCI_BAR_STA2X11 = 0,
+ AHCI_PCI_BAR_ENMOTUS = 2,
AHCI_PCI_BAR_STANDARD = 5,
};

@@ -407,6 +408,9 @@ static const struct pci_device_id ahci_p
/* Asmedia */
{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1061 */

+ /* Enmotus */
+ { PCI_DEVICE(0x1c44, 0x8000), board_ahci },
+
/* Generic, PCI class code for AHCI */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
@@ -1079,9 +1083,11 @@ static int ahci_init_one(struct pci_dev
dev_info(&pdev->dev,
"PDC42819 can only drive SATA devices with this driver\n");

- /* The Connext uses non-standard BAR */
+ /* Both Connext and Enmotus devices use non-standard BARs */
if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06)
ahci_pci_bar = AHCI_PCI_BAR_STA2X11;
+ else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000)
+ ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS;

/* acquire resources */
rc = pcim_enable_device(pdev);



\
 
 \ /
  Last update: 2013-01-25 01:41    [W:0.458 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site