lkml.org 
[lkml]   [2013]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 0/5] Reset PCIe devices to address DMA problem on kdump with iommu
(2013/01/23 9:47), Thomas Renninger wrote:
> On Monday, January 21, 2013 10:11:04 AM Takao Indoh wrote:
>> (2013/01/08 4:09), Thomas Renninger wrote:
> ...
>>> I tried the provided patches first on 2.6.32, then I verfied with 3.8-rc2
>>> and in both cases the disk is not detected anymore in
>>> reset_devices (kexec'ed/kdump) case (but things work fine without these
>>> patches).
>>
>> So the problem that the disk is not detected was caused by exactmap
>> problem you guys are discussing? Or still not detected even if exactmap
>> problem is fixed?
> This problem is related to the 5 PCI resetting patches.
> Dumping worked with a 2.6.32 and a 3.8-rc2 kernel, adding the PCI resetting
> patches broke both. I first tried 2.6.32 and verified with 3.8-rc2 to make sure
> I didn't mess up the backport adjustings of the patches to 2.6.32.

If you have a chance please try again the patches with the latest
firmware. I met another problem on megaraid_sas disk when I tested the
patches and it did not occur after updated its firmware to the latest
one.

> Unfortunately this Dell platform takes really long to boot.
> I can give it the one or other test, but please do not bomb me with patches.
>
> For info:
> About the interrupt remapping error interrupt storm in kdump case I tried to
> reproduce on this machine, but never could: The guys who saw that also cannot
> reproduce this anymore.
>
> Two ideas I had about this:
> - As said already, (also) try to catch the error case and try to reset the
> the device in AER/Specific iterrupt remapping error interrupt caught.
> - Have a look at coreboot, these guys should know how to initialize the PCI
> subsystem from scratch and might have some well tested PCI resetting
> code in place already (no idea, just a thought).

Ok, at first I'll take a look at AER code to check how it resets devices
on PCIe error.

Thanks,
Takao Indoh

>
> Thomas
>
>



\
 
 \ /
  Last update: 2013-01-24 02:01    [W:0.117 / U:1.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site