lkml.org 
[lkml]   [2013]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [alsa-devel] [PATCH V2 2/2] ASoC: Davinci: machine: Add device tree binding
On Wed, Jan 23, 2013 at 12:39:35PM +0000, Hebbar, Gururaja wrote:
> On Fri, Jan 04, 2013 at 17:56:12, Mark Brown wrote:

> > The CODEC driver biases should be changed over to be supplies, this
> > makes the above much more natural - the routing there is a hack for
> > older versions of ASoc. Otherwise this looks fine.

> ON TLV320AIC3x Codec, MIC Bias power on/off share the same register bits
> with Bias voltage output.

So you need to use an event to write the actual enable bit.

> SGTL5000 --> Single register for MIC BIAS enable & output impedance of MIC
> Bias. The driver uses SND_SOC_DAPM_POST_PMU & SND_SOC_DAPM_PRE_PMD macro to
> handle the MIC Bias enable & disable event.

This is the way these things should be handled.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-01-23 17:21    [W:0.111 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site