lkml.org 
[lkml]   [2013]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/9] ARM: at91/at91_dt_defconfig: remove memory specification to cmdline
On 01/23/2013 11:20 AM, Jean-Christophe PLAGNIOL-VILLARD :
> On 10:48 Wed 23 Jan , Nicolas Ferre wrote:
>> No need for this cmdline option as we are using DT.
>> Moreover this defconfig is targeted to multiple SoC/boards: this option
>> was nonsense.
> just keep the console the rest is a nonsense too
>
> as on 9g45 the initrd will be at 0x7xxxxxxx

BTW, how do you mix 9g45 with other sam9's in this defconfig: it is not
possible due to this difference in address rage, it not it?

In this case, should we remove the
CONFIG_SOC_AT91SAM9G45=y
from this at91_dt_defconfig?

> the console too but as the patch serie to support via DT is not yet mainline
> we can keep it
>
> Best Regards,
> J.
>>
>> Reported-by: Josh Wu <josh.wu@atmel.com>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>> ---
>> arch/arm/configs/at91_dt_defconfig | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
>> index b175577..a353ff6 100644
>> --- a/arch/arm/configs/at91_dt_defconfig
>> +++ b/arch/arm/configs/at91_dt_defconfig
>> @@ -31,7 +31,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
>> CONFIG_ZBOOT_ROM_BSS=0x0
>> CONFIG_ARM_APPENDED_DTB=y
>> CONFIG_ARM_ATAG_DTB_COMPAT=y
>> -CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
>> +CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
>> CONFIG_KEXEC=y
>> CONFIG_AUTO_ZRELADDR=y
>> # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set

Bye,
--
Nicolas Ferre


\
 
 \ /
  Last update: 2013-01-23 13:21    [W:0.097 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site