lkml.org 
[lkml]   [2013]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[git patches] libata fixes

Please pull 803739d25c2343da6d2f95eebdcbc08bf67097d4 from
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git tags/upstream-linus

to receive the following updates:

drivers/ata/ahci.c | 8 +++++++-
drivers/ata/libahci.c | 6 +++---
drivers/ata/libata-core.c | 22 +++++++++++++---------
drivers/ata/libata-eh.c | 2 +-
include/linux/ata.h | 8 +++++---
include/linux/libata.h | 4 ++--
6 files changed, 31 insertions(+), 19 deletions(-)

Bian Yu (1):
[libata] ahci: Fix lack of command retry after a success error handler.

Hugh Daschbach (1):
[libata] ahci: Add support for Enmotus Bobcat device.

Shane Huang (1):
[libata] replace sata_settings with devslp_timing

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 7862d17..4979127 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -53,6 +53,7 @@

enum {
AHCI_PCI_BAR_STA2X11 = 0,
+ AHCI_PCI_BAR_ENMOTUS = 2,
AHCI_PCI_BAR_STANDARD = 5,
};

@@ -410,6 +411,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */
{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */

+ /* Enmotus */
+ { PCI_DEVICE(0x1c44, 0x8000), board_ahci },
+
/* Generic, PCI class code for AHCI */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
@@ -1098,9 +1102,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
dev_info(&pdev->dev,
"PDC42819 can only drive SATA devices with this driver\n");

- /* The Connext uses non-standard BAR */
+ /* Both Connext and Enmotus devices use non-standard BARs */
if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06)
ahci_pci_bar = AHCI_PCI_BAR_STA2X11;
+ else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000)
+ ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS;

/* acquire resources */
rc = pcim_enable_device(pdev);
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 320712a..6cd7805 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1951,13 +1951,13 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
/* Use the nominal value 10 ms if the read MDAT is zero,
* the nominal value of DETO is 20 ms.
*/
- if (dev->sata_settings[ATA_LOG_DEVSLP_VALID] &
+ if (dev->devslp_timing[ATA_LOG_DEVSLP_VALID] &
ATA_LOG_DEVSLP_VALID_MASK) {
- mdat = dev->sata_settings[ATA_LOG_DEVSLP_MDAT] &
+ mdat = dev->devslp_timing[ATA_LOG_DEVSLP_MDAT] &
ATA_LOG_DEVSLP_MDAT_MASK;
if (!mdat)
mdat = 10;
- deto = dev->sata_settings[ATA_LOG_DEVSLP_DETO];
+ deto = dev->devslp_timing[ATA_LOG_DEVSLP_DETO];
if (!deto)
deto = 20;
} else {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9e8b99a..46cd3f4 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2325,24 +2325,28 @@ int ata_dev_configure(struct ata_device *dev)
}
}

- /* check and mark DevSlp capability */
- if (ata_id_has_devslp(dev->id))
- dev->flags |= ATA_DFLAG_DEVSLP;
-
- /* Obtain SATA Settings page from Identify Device Data Log,
- * which contains DevSlp timing variables etc.
- * Exclude old devices with ata_id_has_ncq()
+ /* Check and mark DevSlp capability. Get DevSlp timing variables
+ * from SATA Settings page of Identify Device Data Log.
*/
- if (ata_id_has_ncq(dev->id)) {
+ if (ata_id_has_devslp(dev->id)) {
+ u8 sata_setting[ATA_SECT_SIZE];
+ int i, j;
+
+ dev->flags |= ATA_DFLAG_DEVSLP;
err_mask = ata_read_log_page(dev,
ATA_LOG_SATA_ID_DEV_DATA,
ATA_LOG_SATA_SETTINGS,
- dev->sata_settings,
+ sata_setting,
1);
if (err_mask)
ata_dev_dbg(dev,
"failed to get Identify Device Data, Emask 0x%x\n",
err_mask);
+ else
+ for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) {
+ j = ATA_LOG_DEVSLP_OFFSET + i;
+ dev->devslp_timing[i] = sata_setting[j];
+ }
}

dev->cdb_len = 16;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index bf039b0..bcf4437 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2094,7 +2094,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
*/
static inline int ata_eh_worth_retry(struct ata_queued_cmd *qc)
{
- if (qc->flags & AC_ERR_MEDIA)
+ if (qc->err_mask & AC_ERR_MEDIA)
return 0; /* don't retry media errors */
if (qc->flags & ATA_QCFLAG_IO)
return 1; /* otherwise retry anything from fs stack */
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 408da95..8f7a3d6 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -297,10 +297,12 @@ enum {
ATA_LOG_SATA_NCQ = 0x10,
ATA_LOG_SATA_ID_DEV_DATA = 0x30,
ATA_LOG_SATA_SETTINGS = 0x08,
- ATA_LOG_DEVSLP_MDAT = 0x30,
+ ATA_LOG_DEVSLP_OFFSET = 0x30,
+ ATA_LOG_DEVSLP_SIZE = 0x08,
+ ATA_LOG_DEVSLP_MDAT = 0x00,
ATA_LOG_DEVSLP_MDAT_MASK = 0x1F,
- ATA_LOG_DEVSLP_DETO = 0x31,
- ATA_LOG_DEVSLP_VALID = 0x37,
+ ATA_LOG_DEVSLP_DETO = 0x01,
+ ATA_LOG_DEVSLP_VALID = 0x07,
ATA_LOG_DEVSLP_VALID_MASK = 0x80,

/* READ/WRITE LONG (obsolete) */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 83ba0ab..649e5f8 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -652,8 +652,8 @@ struct ata_device {
u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
};

- /* Identify Device Data Log (30h), SATA Settings (page 08h) */
- u8 sata_settings[ATA_SECT_SIZE];
+ /* DEVSLP Timing Variables from Identify Device Data Log */
+ u8 devslp_timing[ATA_LOG_DEVSLP_SIZE];

/* error history */
int spdn_cnt;

\
 
 \ /
  Last update: 2013-01-21 22:02    [W:1.284 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site