lkml.org 
[lkml]   [2013]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 5/5] fix kvm's use of __pa() on percpu areas
From
Date
Final question: are any of these done in frequent paths?  (I believe no, but...)

Dave Hansen <dave@linux.vnet.ibm.com> wrote:

>
>In short, it is illegal to call __pa() on an address holding
>a percpu variable. The times when this actually matters are
>pretty obscure (certain 32-bit NUMA systems), but it _does_
>happen. It is important to keep KVM guests working on these
>systems because the real hardware is getting harder and
>harder to find.
>
>This bug manifested first by me seeing a plain hang at boot
>after this message:
>
> CPU 0 irqstacks, hard=f3018000 soft=f301a000
>
>or, sometimes, it would actually make it out to the console:
>
>[ 0.000000] BUG: unable to handle kernel paging request at ffffffff
>
>I eventually traced it down to the KVM async pagefault code.
>This can be worked around by disabling that code either at
>compile-time, or on the kernel command-line.
>
>The kvm async pagefault code was injecting page faults in
>to the guest which the guest misinterpreted because its
>"reason" was not being properly sent from the host.
>
>The guest passes a physical address of an per-cpu async page
>fault structure via an MSR to the host. Since __pa() is
>broken on percpu data, the physical address it sent was
>bascially bogus and the host went scribbling on random data.
>The guest never saw the real reason for the page fault (it
>was injected by the host), assumed that the kernel had taken
>a _real_ page fault, and panic()'d. The behavior varied,
>though, depending on what got corrupted by the bad write.
>
>Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
>Acked-by: Rik van Riel <riel@redhat.com>
>---
>
> linux-2.6.git-dave/arch/x86/kernel/kvm.c | 9 +++++----
> linux-2.6.git-dave/arch/x86/kernel/kvmclock.c | 4 ++--
> 2 files changed, 7 insertions(+), 6 deletions(-)
>
>diff -puN arch/x86/kernel/kvm.c~fix-kvm-__pa-use-on-percpu-areas
>arch/x86/kernel/kvm.c
>---
>linux-2.6.git/arch/x86/kernel/kvm.c~fix-kvm-__pa-use-on-percpu-areas 2013-01-17
>10:22:26.914436992 -0800
>+++ linux-2.6.git-dave/arch/x86/kernel/kvm.c 2013-01-17
>10:22:26.922437062 -0800
>@@ -289,9 +289,9 @@ static void kvm_register_steal_time(void
>
> memset(st, 0, sizeof(*st));
>
>- wrmsrl(MSR_KVM_STEAL_TIME, (__pa(st) | KVM_MSR_ENABLED));
>+ wrmsrl(MSR_KVM_STEAL_TIME, (slow_virt_to_phys(st) |
>KVM_MSR_ENABLED));
> printk(KERN_INFO "kvm-stealtime: cpu %d, msr %lx\n",
>- cpu, __pa(st));
>+ cpu, slow_virt_to_phys(st));
> }
>
>static DEFINE_PER_CPU(unsigned long, kvm_apic_eoi) =
>KVM_PV_EOI_DISABLED;
>@@ -316,7 +316,7 @@ void __cpuinit kvm_guest_cpu_init(void)
> return;
>
> if (kvm_para_has_feature(KVM_FEATURE_ASYNC_PF) && kvmapf) {
>- u64 pa = __pa(&__get_cpu_var(apf_reason));
>+ u64 pa = slow_virt_to_phys(&__get_cpu_var(apf_reason));
>
> #ifdef CONFIG_PREEMPT
> pa |= KVM_ASYNC_PF_SEND_ALWAYS;
>@@ -332,7 +332,8 @@ void __cpuinit kvm_guest_cpu_init(void)
> /* Size alignment is implied but just to make it explicit. */
> BUILD_BUG_ON(__alignof__(kvm_apic_eoi) < 4);
> __get_cpu_var(kvm_apic_eoi) = 0;
>- pa = __pa(&__get_cpu_var(kvm_apic_eoi)) | KVM_MSR_ENABLED;
>+ pa = slow_virt_to_phys(&__get_cpu_var(kvm_apic_eoi))
>+ | KVM_MSR_ENABLED;
> wrmsrl(MSR_KVM_PV_EOI_EN, pa);
> }
>
>diff -puN arch/x86/kernel/kvmclock.c~fix-kvm-__pa-use-on-percpu-areas
>arch/x86/kernel/kvmclock.c
>---
>linux-2.6.git/arch/x86/kernel/kvmclock.c~fix-kvm-__pa-use-on-percpu-areas 2013-01-17
>10:22:26.918437028 -0800
>+++ linux-2.6.git-dave/arch/x86/kernel/kvmclock.c 2013-01-17
>10:22:26.922437062 -0800
>@@ -162,8 +162,8 @@ int kvm_register_clock(char *txt)
> int low, high, ret;
> struct pvclock_vcpu_time_info *src = &hv_clock[cpu].pvti;
>
>- low = (int)__pa(src) | 1;
>- high = ((u64)__pa(src) >> 32);
>+ low = (int)slow_virt_to_phys(src) | 1;
>+ high = ((u64)slow_virt_to_phys(src) >> 32);
> ret = native_write_msr_safe(msr_kvm_system_time, low, high);
> printk(KERN_INFO "kvm-clock: cpu %d, msr %x:%x, %s\n",
> cpu, high, low, txt);
>_

--
Sent from my mobile phone. Please excuse brevity and lack of formatting.


\
 
 \ /
  Last update: 2013-01-21 20:41    [W:1.611 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site