lkml.org 
[lkml]   [2013]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v9 07/11] PCI, acpiphp: Move and enhance hotplug support of pci host bridge
Date
On Thursday, January 17, 2013 11:53:18 PM Yinghai Lu wrote:
> We have partial hot-add support in acpiphp driver, and it is confusing.
>
> Move host bridge hot-add support to pci_root.c, and keep acpiphp simple,
> also add hot-remove support in pci_root.c.
>
> How to test it: if sci_emu patch is applied,
>
> Find out root bus number to acpi root name mapping from dmesg or /sys
>
> echo "\_SB.PCIB 3" > /sys/kernel/debug/acpi/sci_notify
> to remove root bus
>
> echo "\_SB.PCIB 1" > /sys/kernel/debug/acpi/sci_notify
> to add back root bus
>
> -v2: put back pci_root_hp change in one patch
> -v3: add pcibios_resource_survey_bus() calling
> -v4: remove not needed code with remove_bridge
> -v5: put back support for acpiphp support for slots just on root bus.
> -v6: change some functions to *_p2p_* to make it more clean.
> -v7: split hot_added change out.
> -v8: Move to pci_root.c instead of adding another file requested by Bjorn.
> -v9: Fold three following patches into this one for easy review:
> a: Add missing hot_remove support for root device.
> b: Tang Chen noticed that hotplug through container will not update
> acpi_root_bridge list. After closely checking, we don't need
> that for struct for tracking and could use acpi_pci_root directly.
> c: Tang Chen found handle_root_bridge_removal is very similiar to
> acpi_bus_hot_remove_device(). Change to handle_root_bridge_removal
> to use acpi_bus_hot_remove_device.
>
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> ---
> drivers/acpi/pci_root.c | 139 ++++++++++++++++++++++++++++++++++++
> drivers/pci/hotplug/acpiphp_glue.c | 59 ++++-----------
> 2 files changed, 154 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
> index bf5108a..3ce5d80 100644
> --- a/drivers/acpi/pci_root.c
> +++ b/drivers/acpi/pci_root.c
> @@ -655,3 +655,142 @@ int __init acpi_pci_root_init(void)
>
> return 0;
> }
> +
> +/* Support root bridge hotplug */
> +
> +static void handle_root_bridge_insertion(acpi_handle handle)
> +{
> + struct acpi_device *device, *pdevice;
> + acpi_handle phandle;
> + int ret_val;
> +
> + acpi_get_parent(handle, &phandle);
> + if (acpi_bus_get_device(phandle, &pdevice)) {
> + printk(KERN_DEBUG "no parent device, assuming NULL\n");
> + pdevice = NULL;
> + }
> + if (!acpi_bus_get_device(handle, &device)) {
> + /* check if pci root_bus is removed */
> + struct acpi_pci_root *root = acpi_driver_data(device);
> + if (pci_find_bus(root->segment, root->secondary.start))
> + return;
> +
> + printk(KERN_DEBUG "bus exists... trim\n");
> + /* this shouldn't be in here, so remove
> + * the bus then re-add it...
> + */
> + ret_val = acpi_bus_trim(device);

You said that this followed acpiphp, but the purpose of the trimming in there
seems to be to handle surprise removal and re-insertion, which I'm not sure is
OK with something like a host bridge.

The drawback is that if we have a spurious ACPI_NOTIFY_BUS_CHECK or
ACPI_NOTIFY_DEVICE_CHECK, we'll be trying to remove the whole bus here in
response. That doesn't sound quite right.

> + printk(KERN_DEBUG "acpi_bus_trim return %x\n", ret_val);
> + }
> + if (acpi_bus_add(handle))
> + printk(KERN_ERR "cannot add bridge to acpi list\n");
> +}
> +
> +static void handle_root_bridge_removal(struct acpi_device *device)
> +{
> + struct acpi_eject_event *ej_event;
> +
> + ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
> + if (!ej_event)

Shouldn't we do acpi_evaluate_hotplug_ost() here?

> + return;
> +
> + ej_event->device = device;
> + ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
> +
> + acpi_bus_hot_remove_device(ej_event);
> +}
> +
> +static void _handle_hotplug_event_root(struct work_struct *work)
> +{
> + struct acpi_pci_root *root;
> + char objname[64];
> + struct acpi_buffer buffer = { .length = sizeof(objname),
> + .pointer = objname };
> + struct acpi_hp_work *hp_work;
> + acpi_handle handle;
> + u32 type;
> +
> + hp_work = container_of(work, struct acpi_hp_work, work);
> + handle = hp_work->handle;
> + type = hp_work->type;
> +
> + root = acpi_pci_find_root(handle);
> +
> + acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);

Is the path guaranteed not to be longer than 64 characters?

> +
> + switch (type) {
> + case ACPI_NOTIFY_BUS_CHECK:
> + /* bus enumerate */
> + printk(KERN_DEBUG "%s: Bus check notify on %s\n", __func__,
> + objname);

pr_debug() would be nicer (and analogously below).

> + if (!root)
> + handle_root_bridge_insertion(handle);
> +
> + break;
> +
> + case ACPI_NOTIFY_DEVICE_CHECK:
> + /* device check */
> + printk(KERN_DEBUG "%s: Device check notify on %s\n", __func__,
> + objname);
> + if (!root)
> + handle_root_bridge_insertion(handle);
> + break;
> +
> + case ACPI_NOTIFY_EJECT_REQUEST:
> + /* request device eject */
> + printk(KERN_DEBUG "%s: Device eject notify on %s\n", __func__,
> + objname);
> + if (root)
> + handle_root_bridge_removal(root->device);
> + break;
> + default:
> + printk(KERN_WARNING "notify_handler: unknown event type 0x%x for %s\n",
> + type, objname);
> + break;
> + }
> +
> + kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
> +}
> +
> +static void handle_hotplug_event_root(acpi_handle handle, u32 type,
> + void *context)
> +{
> + alloc_acpi_hp_work(handle, type, context,
> + _handle_hotplug_event_root);
> +}
> +
> +static acpi_status __init
> +find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
> +{
> + char objname[64];
> + struct acpi_buffer buffer = { .length = sizeof(objname),
> + .pointer = objname };
> + int *count = (int *)context;
> +
> + if (!acpi_is_root_bridge(handle))
> + return AE_OK;
> +
> + (*count)++;
> +
> + acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
> +
> + acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
> + handle_hotplug_event_root, NULL);
> + printk(KERN_DEBUG "acpi root: %s notify handler installed\n", objname);
> +
> + return AE_OK;
> +}
> +
> +static int __init acpi_pci_root_hp_init(void)
> +{
> + int num = 0;
> +
> + acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
> + ACPI_UINT32_MAX, find_root_bridges, NULL, &num, NULL);
> +
> + printk(KERN_DEBUG "Found %d acpi root devices\n", num);
> +
> + return 0;
> +}
> +
> +subsys_initcall(acpi_pci_root_hp_init);

Why do we need a separate initcall here? Is it not enough to call
acpi_pci_root_hp_init() from acpi_init() or acpi_scan_init(), or
acpi_pci_root_init() even?

> diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
> index 55e03b6..45917a5 100644
> --- a/drivers/pci/hotplug/acpiphp_glue.c
> +++ b/drivers/pci/hotplug/acpiphp_glue.c
> @@ -543,10 +543,13 @@ static void cleanup_bridge(struct acpiphp_bridge *bridge)
> acpi_status status;
> acpi_handle handle = bridge->handle;
>
> - status = acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
> + if (bridge->type != BRIDGE_TYPE_HOST) {
> + status = acpi_remove_notify_handler(handle,
> + ACPI_SYSTEM_NOTIFY,
> handle_hotplug_event_bridge);
> - if (ACPI_FAILURE(status))
> - err("failed to remove notify handler\n");
> + if (ACPI_FAILURE(status))
> + err("failed to remove notify handler\n");
> + }
>
> if ((bridge->type != BRIDGE_TYPE_HOST) &&
> ((bridge->flags & BRIDGE_HAS_EJ0) && bridge->func)) {
> @@ -630,9 +633,6 @@ static void remove_bridge(struct acpi_pci_root *root)
> bridge = acpiphp_handle_to_bridge(handle);
> if (bridge)
> cleanup_bridge(bridge);
> - else
> - acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
> - handle_hotplug_event_bridge);
> }
>
> static int power_on_slot(struct acpiphp_slot *slot)
> @@ -1123,18 +1123,12 @@ static void acpiphp_sanitize_bus(struct pci_bus *bus)
> }
>
> /* Program resources in newly inserted bridge */
> -static int acpiphp_configure_bridge (acpi_handle handle)
> +static int acpiphp_configure_p2p_bridge(acpi_handle handle)
> {
> - struct pci_bus *bus;
> + struct pci_dev *pdev = acpi_get_pci_dev(handle);
> + struct pci_bus *bus = pdev->subordinate;
>
> - if (acpi_is_root_bridge(handle)) {
> - struct acpi_pci_root *root = acpi_pci_find_root(handle);
> - bus = root->bus;
> - } else {
> - struct pci_dev *pdev = acpi_get_pci_dev(handle);
> - bus = pdev->subordinate;
> - pci_dev_put(pdev);
> - }
> + pci_dev_put(pdev);
>
> pci_bus_size_bridges(bus);
> pci_bus_assign_resources(bus);
> @@ -1144,7 +1138,7 @@ static int acpiphp_configure_bridge (acpi_handle handle)
> return 0;
> }
>
> -static void handle_bridge_insertion(acpi_handle handle, u32 type)
> +static void handle_p2p_bridge_insertion(acpi_handle handle, u32 type)
> {
> struct acpi_device *device;
>
> @@ -1162,8 +1156,8 @@ static void handle_bridge_insertion(acpi_handle handle, u32 type)
> err("ACPI device object missing\n");
> return;
> }
> - if (!acpiphp_configure_bridge(handle))
> - add_bridge(handle);
> + if (!acpiphp_configure_p2p_bridge(handle))
> + add_p2p_bridge(handle);
> else
> err("cannot configure and start bridge\n");
>
> @@ -1221,7 +1215,7 @@ static void _handle_hotplug_event_bridge(struct work_struct *work)
>
> if (acpi_bus_get_device(handle, &device)) {
> /* This bridge must have just been physically inserted */
> - handle_bridge_insertion(handle, type);
> + handle_p2p_bridge_insertion(handle, type);
> goto out;
> }
>
> @@ -1396,21 +1390,6 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type,
> alloc_acpi_hp_work(handle, type, context, _handle_hotplug_event_func);
> }
>
> -static acpi_status
> -find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
> -{
> - int *count = (int *)context;
> -
> - if (!acpi_is_root_bridge(handle))
> - return AE_OK;
> -
> - (*count)++;
> - acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
> - handle_hotplug_event_bridge, NULL);
> -
> - return AE_OK ;
> -}
> -
> static struct acpi_pci_driver acpi_pci_hp_driver = {
> .add = add_bridge,
> .remove = remove_bridge,
> @@ -1421,15 +1400,7 @@ static struct acpi_pci_driver acpi_pci_hp_driver = {
> */
> int __init acpiphp_glue_init(void)
> {
> - int num = 0;
> -
> - acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
> - ACPI_UINT32_MAX, find_root_bridges, NULL, &num, NULL);
> -
> - if (num <= 0)
> - return -1;
> - else
> - acpi_pci_register_driver(&acpi_pci_hp_driver);
> + acpi_pci_register_driver(&acpi_pci_hp_driver);
>
> return 0;
> }

Thanks,
Rafael


--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.


\
 
 \ /
  Last update: 2013-01-21 00:41    [W:0.116 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site