lkml.org 
[lkml]   [2013]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv4 0/8] Support for Tegra 2D hardware
On 01/02/2013 05:42 PM, Terje Bergström wrote:
> On 28.12.2012 11:14, Mark Zhang wrote:
>> diff --git a/drivers/gpu/drm/tegra/gr2d.c b/drivers/gpu/drm/tegra/gr2d.c
>> index a936902..c3ded60 100644
>> --- a/drivers/gpu/drm/tegra/gr2d.c
>> +++ b/drivers/gpu/drm/tegra/gr2d.c
>> @@ -131,6 +131,14 @@ static int gr2d_submit(struct tegra_drm_context
>> *context,
>> if (err)
>> goto fail;
>>
>> + /* We define CMA as an temporary solution in host1x driver.
>> + That's also why we have a CMA kernel config in it.
>> + But seems here, in tegradrm, we hardcode the CMA here.
>> + So what do you do when host1x change to IOMMU?
>> + Do we also need to define a CMA config in tegradrm
>> driver,
>> + then after host1x changes to IOMMU, we add another IOMMU
>> + config in tegradrm? Or we should invent another more
>> + generic wrapper layer here? */
>> cmdbuf.mem = handle_cma_to_host1x(drm, file_priv,
>> cmdbuf.mem);
>
> Lucas is working on host1x allocator, so let's defer this comment until
> we have Lucas' code.
>

OK.

>> diff --git a/drivers/gpu/host1x/job.c b/drivers/gpu/host1x/job.c
>> index cc8ca2f..0867b72 100644
>> --- a/drivers/gpu/host1x/job.c
>> +++ b/drivers/gpu/host1x/job.c
>> @@ -82,6 +82,26 @@ struct host1x_job *host1x_job_alloc(struct
>> host1x_channel *ch,
>> mem += num_unpins * sizeof(dma_addr_t);
>> job->pin_ids = num_unpins ? mem : NULL;
>>
>> + /* I think this is a somewhat ugly design.
>> + Actually "addr_phys" is consisted by "reloc_addr_phys" and
>> + "gather_addr_phys".
>> + Why don't we just declare "reloc_addr_phys" and
>> "gather_addr_phys"?
>> + In current design, let's say if one nvhost newbie changes the
>> order
>> + of these 2 blocks of code in function "pin_job_mem":
>> +
>> + for (i = 0; i < job->num_relocs; i++) {
>> + struct host1x_reloc *reloc = &job->relocarray[i];
>> + job->pin_ids[count] = reloc->target;
>> + count++;
>> + }
>> +
>> + for (i = 0; i < job->num_gathers; i++) {
>> + struct host1x_job_gather *g = &job->gathers[i];
>> + job->pin_ids[count] = g->mem_id;
>> + count++;
>> + }
>> +
>> + Then likely something weird occurs... */
>
> We do this because this way we can implement batch pinning of memory
> handles. This way we can decrease memory handle management a lot as we
> need to do locking only once per submit.
>

Sorry I didn't get it. Yes, in current design, you can pin all mem
handles in one time but I haven't found anything related with "locking
only once per submit".

My idea is:
- remove "job->addr_phys"
- assign "job->reloc_addr_phys" & "job->gather_addr_phys" separately
- In "pin_job_mem", just call "host1x_memmgr_pin_array_ids" twice to
fill the "reloc_addr_phy" & "gather_addr_phys".

Anything I misunderstood?

> Decreasing memory management overhead is really important, because in
> complex graphics cases, there are might be a hundreds of buffer
> references per submit, and several submits per frame. Any extra overhead
> relates directly to reduced performance.
>
>> job->reloc_addr_phys = job->addr_phys;
>> job->gather_addr_phys = &job->addr_phys[num_relocs];
>>
>> @@ -252,6 +272,10 @@ static int do_relocs(struct host1x_job *job,
>> }
>> }
>>
>> + /* I have question here. Does this mean the address info
>> + which need to be relocated(according to the libdrm codes,
>> + seems this address is "0xDEADBEEF") always staying at the
>> + beginning of a page? */
>> __raw_writel(
>> (job->reloc_addr_phys[i] +
>> reloc->target_offset) >> reloc->shift,
>
> No - the slot can be anywhere. That's why we have cmdbuf_offset in the
> reloc struct.
>

Yes. Sorry I must misread the code before.

>> @@ -565,6 +589,7 @@ int host1x_job_pin(struct host1x_job *job, struct
>> platform_device *pdev)
>> }
>> }
>>
>> + /* if (host1x_firewall && !err) { */
>> if (host1x_firewall) {
>> err = copy_gathers(job, pdev);
>> if (err) {
>
> Will add.
>
>> @@ -573,6 +598,9 @@ int host1x_job_pin(struct host1x_job *job, struct
>> platform_device *pdev)
>> }
>> }
>>
>> +/* Rename this label to "out" or something else.
>> + Because if everything goes right, the codes under this label also
>> + get executed. */
>> fail:
>> wmb();
>
> Will do.
>
>>
>> diff --git a/drivers/gpu/host1x/memmgr.c b/drivers/gpu/host1x/memmgr.c
>> index f3954f7..bb5763d 100644
>> --- a/drivers/gpu/host1x/memmgr.c
>> +++ b/drivers/gpu/host1x/memmgr.c
>> @@ -156,6 +156,9 @@ int host1x_memmgr_pin_array_ids(struct
>> platform_device *dev,
>> count, &unpin_data[pin_count],
>> phys_addr);
>>
>> + /* I don't think the current "host1x_cma_pin_array_ids"
>> + is able to return a negative value. So this "if" doesn't
>> + make sense...*/
>> if (cma_count < 0) {
>> /* clean up previous handles */
>> while (pin_count) {
>
> It should return negative in case of error.
>

"host1x_cma_pin_array_ids" doesn't return negative value right now, so
maybe you need to take a look at it.

> Terje
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-01-03 05:21    [W:0.061 / U:0.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site