lkml.org 
[lkml]   [2013]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 18/22] USB: ehci-omap: Don't free gpios that we didn't request
Date
This driver does not request any gpios so don't free them.
Fixes L3 bus error on multiple modprobe/rmmod of ehci_hcd
with ehci-omap in use.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/usb/host/ehci-omap.c | 8 --------
1 files changed, 0 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index ac17a7c..e9d9b09 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -288,7 +288,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usb_hcd *hcd = dev_get_drvdata(dev);
- struct ehci_hcd_omap_platform_data *pdata = dev->platform_data;

usb_remove_hcd(hcd);
disable_put_regulator(dev->platform_data);
@@ -298,13 +297,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);

- if (pdata->phy_reset) {
- if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_free(pdata->reset_gpio_port[0]);
-
- if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_free(pdata->reset_gpio_port[1]);
- }
return 0;
}

--
1.7.4.1


\
 
 \ /
  Last update: 2013-01-02 16:42    [W:0.153 / U:1.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site