lkml.org 
[lkml]   [2013]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] x86: enable common clk and add support for Lynxpoint clocks
Date
This is second iteration of the series. First revision is available here:

https://lkml.org/lkml/2013/1/14/213

Idea is to let the LPSS peripheral drivers to use common clk framework to
get clock rate or enable/disable the functional clock. The discussion
started in this thread:

http://thread.gmane.org/gmane.linux.kernel/1417691

In summary, there is no point in adding a special case code to the drivers
in order to pass them a fixed clock rate, but instead x86 should just
enable common clk subsystem and take advantage of it.

We try to address that in this series. Instead of enabling the common clk
framework by default we place it under CONFIG_X86_INTEL_LPSS config option.
This option then selects what is necessary to support the LPSS peripheral
drivers.

We then create the Lynxpoint clock tree and populate it accordingly.

Changes to previous version:
- add config option CONFIG_X86_INTEL_LPSS
- pass flags to acpi_create_platform_device() instead of calling
function in drivers/acpi/scan.c
- create the clock platform devices in drivers/acpi/acpi_platform.c

Please review.

Mika Westerberg (3):
x86: add support for Intel Low Power Subsystem
clk: x86: add support for Lynxpoint LPSS clocks
ACPI / platform: create LPSS clocks if Lynxpoint devices are found
during scan

arch/x86/Kconfig | 10 +++++
drivers/acpi/acpi_platform.c | 25 ++++++++++-
drivers/acpi/internal.h | 6 ++-
drivers/acpi/scan.c | 22 +++++-----
drivers/clk/Makefile | 1 +
drivers/clk/x86/Makefile | 2 +
drivers/clk/x86/clk-lpss.c | 99 ++++++++++++++++++++++++++++++++++++++++++
drivers/clk/x86/clk-lpss.h | 36 +++++++++++++++
drivers/clk/x86/clk-lpt.c | 86 ++++++++++++++++++++++++++++++++++++
9 files changed, 275 insertions(+), 12 deletions(-)
create mode 100644 drivers/clk/x86/Makefile
create mode 100644 drivers/clk/x86/clk-lpss.c
create mode 100644 drivers/clk/x86/clk-lpss.h
create mode 100644 drivers/clk/x86/clk-lpt.c

--
1.7.10.4



\
 
 \ /
  Last update: 2013-01-18 15:01    [W:0.126 / U:0.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site