lkml.org 
[lkml]   [2013]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: shmobile: armadillo800eva: set clock rates before timer init
Date
Previously clock rates were set after initialization of timer.
Therefore the timer used the default extal1 clock rate (25MHz)
instead of the correct rate for this board (24MHz).

Signed-off-by: Hideki EIRAKU <hdk@igel.co.jp>
---
arch/arm/mach-shmobile/board-armadillo800eva.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 5353adf..1e79cfb 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1175,8 +1175,6 @@ static void __init eva_init(void)
platform_add_devices(eva_devices,
ARRAY_SIZE(eva_devices));

- eva_clock_init();
-
rmobile_add_device_to_domain("A4LC", &lcdc0_device);
rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device);
if (usb)
@@ -1187,6 +1185,9 @@ static void __init eva_earlytimer_init(void)
{
r8a7740_clock_init(MD_CK0 | MD_CK2);
shmobile_earlytimer_init();
+
+ /* the rate of extal1 clock must be set before late_time_init */
+ eva_clock_init();
}

static void __init eva_add_early_devices(void)
--
1.8.0


\
 
 \ /
  Last update: 2013-01-18 06:41    [W:0.042 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site