lkml.org 
[lkml]   [2013]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] ARM: dts: omap: add dt data for MUSB
Date
This patch series adds dt data to get MUSB working in omap4 and omap3.
Long time back a patch series with the same title was sent but only
a part of it got merged. The rest of it wasn't merged because of
adding omap control usb data to glue and usb phy.

Now there exists a separate driver for control usb and hence added a
separate dt node for control usb.

This series was developed on
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv
+ "usb: musb: add driver for control module" patch series

Did basic enumeration testing in omap4 panda, omap4 sdp and omap3 beagle.

Kishon Vijay Abraham I (3):
ARM: dts: omap: Add omap control usb data
ARM: dts: omap: Add omap-usb2 dt data
ARM: dts: omap: Add usb_otg and glue data

Documentation/devicetree/bindings/usb/omap-usb.txt | 2 ++
arch/arm/boot/dts/omap3-beagle-xm.dts | 6 +++++
arch/arm/boot/dts/omap3-evm.dts | 6 +++++
arch/arm/boot/dts/omap3-overo.dtsi | 6 +++++
arch/arm/boot/dts/omap3.dtsi | 12 ++++++++++
arch/arm/boot/dts/omap4-panda.dts | 6 +++++
arch/arm/boot/dts/omap4-sdp.dts | 6 +++++
arch/arm/boot/dts/omap4.dtsi | 25 ++++++++++++++++++++
arch/arm/boot/dts/twl4030.dtsi | 2 +-
9 files changed, 70 insertions(+), 1 deletion(-)

--
1.7.9.5



\
 
 \ /
  Last update: 2013-01-18 11:41    [W:0.035 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site