lkml.org 
[lkml]   [2013]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
On Thu, Jan 17, 2013 at 10:30:15AM +0100, Peter Ujfalusi wrote:
> Hi Luca,
>
> On 01/16/2013 10:45 PM, Luciano Coelho wrote:
> > The code to enable and disable the WiLink shared transport has been
> > removed from the TI-ST driver, so it must be implemented in the board
> > files instead. Add the relevant operations to Panda's board file.
> >
> > Additionally, add the UART2 muxing data, so it's properly configured.
> >
> > Cc: stable <stable@vger.kernel.org> [3.7]
> > Signed-off-by: Luciano Coelho <coelho@ti.com>
> > ---
> >
> > In v2: use gpio_request_one() instead of gpio_request() and
> > gpio_direction_output(). (Thanks Fabio!)
> >
> > arch/arm/mach-omap2/board-omap4panda.c | 50 +++++++++++++++++++++++++++++---
> > 1 file changed, 46 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
> > index 5c8e9ce..f44fccf 100644
> > --- a/arch/arm/mach-omap2/board-omap4panda.c
> > +++ b/arch/arm/mach-omap2/board-omap4panda.c
> > @@ -51,18 +51,50 @@
> > #define GPIO_HUB_NRESET 62
> > #define GPIO_WIFI_PMENA 43
> > #define GPIO_WIFI_IRQ 53
> > +#define GPIO_BT_EN 46
> >
> > /* wl127x BT, FM, GPS connectivity chip */
> > +static int plat_kim_chip_enable(struct kim_data_s *kim_data)
> > +{
> > + gpio_set_value(GPIO_BT_EN, GPIO_LOW);
> > + mdelay(5);
> > + gpio_set_value(GPIO_BT_EN, GPIO_HIGH);
> > + mdelay(100);
> > +
> > + return 0;
> > +}
> > +
> > +static int plat_kim_chip_disable(struct kim_data_s *kim_data)
> > +{
> > + gpio_set_value(GPIO_BT_EN, GPIO_LOW);
> > + mdelay(1);
> > + gpio_set_value(GPIO_BT_EN, GPIO_HIGH);
> > + mdelay(1);
> > + gpio_set_value(GPIO_BT_EN, GPIO_LOW);
> > +
> > + return 0;
> > +}
> > +
> > static struct ti_st_plat_data wilink_platform_data = {
> > - .nshutdown_gpio = 46,
> > .dev_name = "/dev/ttyO1",
> > .flow_cntrl = 1,
> > .baud_rate = 3000000,
> > - .chip_enable = NULL,
> > - .suspend = NULL,
> > - .resume = NULL,
> > + .chip_enable = plat_kim_chip_enable,
> > + .chip_disable = plat_kim_chip_disable,
>
> I just wonder how this is going to work with DT... You are not going to have
> the ability to use callback in this form.
> I think the GPIO handling should be done in the driver itself rather than in
> the board file.

that can (should ?) be moved to ti-st eventually. In fact I don't know
why it was removed in the first place, we would need Pavan to help us
with that query.

Still, for -rc, the minimal patch had to be cooked, right ?

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-01-17 11:02    [W:0.077 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site