lkml.org 
[lkml]   [2013]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: [PATCH v2 4/4] usb: Add APIs to access host registers from Tegra PHY
> -----Original Message-----
> From: Alan Stern [mailto:stern@rowland.harvard.edu]
> Sent: Thursday, January 17, 2013 8:45 PM
> To: Venu Byravarasu
> Cc: gregkh@linuxfoundation.org; balbi@ti.com; linux-usb@vger.kernel.org;
> linux-kernel@vger.kernel.org; swarren@wwwdotorg.org; linux-
> tegra@vger.kernel.org
> Subject: Re: [PATCH v2 4/4] usb: Add APIs to access host registers from Tegra
> PHY
>
> On Thu, 17 Jan 2013, Venu Byravarasu wrote:
>
> > As Tegra PHY driver need to access one of the Host registers,
> > added few APIs to ehci tegra driver.
> >
> > Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
> > ---
> > delta from v1:
> > Taken care of RWC bits, while accessing PORTSC register.
> >
> > drivers/usb/host/ehci-tegra.c | 70
> ++++++++++++++++++++++++++++++++++++-
> > drivers/usb/phy/tegra_usb_phy.c | 51 +++++++--------------------
> > include/linux/usb/tegra_usb_phy.h | 6 +++
> > 3 files changed, 88 insertions(+), 39 deletions(-)
> >
> > diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
> > index 55a9cde..6bbf66a 100644
> > --- a/drivers/usb/host/ehci-tegra.c
> > +++ b/drivers/usb/host/ehci-tegra.c
> > @@ -2,7 +2,7 @@
> > * EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs
> > *
> > * Copyright (C) 2010 Google, Inc.
> > - * Copyright (C) 2009 NVIDIA Corporation
> > + * Copyright (C) 2009 - 2013 NVIDIA Corporation
> > *
> > * This program is free software; you can redistribute it and/or modify it
> > * under the terms of the GNU General Public License as published by the
> > @@ -33,6 +33,16 @@
> > #define TEGRA_USB2_BASE 0xC5004000
> > #define TEGRA_USB3_BASE 0xC5008000
> >
> > +/* PORTSC registers */
> > +#define USB_PORTSC1 0x184
> > +#define USB_PORTSC1_PTS(x) (((x) & 0x3) << 30)
> > +#define USB_PORTSC1_PHCD (1 << 23)
> > +#define USB_PORTSC1_WKOC (1 << 22)
> > +#define USB_PORTSC1_WKDS (1 << 21)
> > +#define USB_PORTSC1_WKCN (1 << 20)
> > +#define USB_PORTSC1_PEC (1 << 3)
> > +#define USB_PORTSC1_CSC (1 << 1)
>
> Why redefine these values when they are already defined in
> include/linux/usb/ehci_defs.h?

Agreed. Will remove all above defines except PHCD & PTS, as these two
fields are added by tegra SOC to PORTSC.

>
> > @@ -605,6 +615,53 @@ static const struct dev_pm_ops
> tegra_ehci_pm_ops = {
> >
> > #endif
> >
> > +/* Bits of PORTSC1, which will get cleared by writing 1 into them */
> > +#define TEGRA_PORTSC_RWC_BITS (USB_PORTSC1_CSC |
> USB_PORTSC1_PEC)
>
> Likewise for this. Not to mention that you forgot to include the
> overcurrent-change bit.

As OCC bit is "not supported" by Tegra20 SOC, did not include it.
Should I still add this, to be compliant with EHCI spec?
Based on your comments, I can update the patch and send for review.

>
> Alan Stern



\
 
 \ /
  Last update: 2013-01-18 06:41    [W:0.075 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site