lkml.org 
[lkml]   [2013]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v7 18/22] USB: ehci-omap: Don't free gpios that we didn't request
    Date
    This driver does not request any gpios so don't free them.
    Fixes L3 bus error on multiple modprobe/rmmod of ehci_hcd
    with ehci-omap in use.

    CC: Alan Stern <stern@rowland.harvard.edu>

    Signed-off-by: Roger Quadros <rogerq@ti.com>
    ---
    drivers/usb/host/ehci-omap.c | 8 --------
    1 files changed, 0 insertions(+), 8 deletions(-)

    diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
    index 134c789..b96a4bf 100644
    --- a/drivers/usb/host/ehci-omap.c
    +++ b/drivers/usb/host/ehci-omap.c
    @@ -288,7 +288,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
    {
    struct device *dev = &pdev->dev;
    struct usb_hcd *hcd = dev_get_drvdata(dev);
    - struct usbhs_omap_platform_data *pdata = dev->platform_data;

    usb_remove_hcd(hcd);
    disable_put_regulator(dev->platform_data);
    @@ -298,13 +297,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
    pm_runtime_put_sync(dev);
    pm_runtime_disable(dev);

    - if (pdata->phy_reset) {
    - if (gpio_is_valid(pdata->reset_gpio_port[0]))
    - gpio_free(pdata->reset_gpio_port[0]);
    -
    - if (gpio_is_valid(pdata->reset_gpio_port[1]))
    - gpio_free(pdata->reset_gpio_port[1]);
    - }
    return 0;
    }

    --
    1.7.4.1


    \
     
     \ /
      Last update: 2013-01-17 16:44    [W:2.061 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site