lkml.org 
[lkml]   [2013]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 17/22] mfd: omap-usb-host: clean up omap_usbhs_init()
Date
We split initializing revision 1 and revision 2 into different
functions. Initialization is now done dynamically so that only
the number of ports available on the system are initialized.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/mfd/omap-usb-host.c | 122 +++++++++++++++++++++++++-----------------
1 files changed, 73 insertions(+), 49 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index fcace6f..ecde38d 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -358,6 +358,75 @@ static int usbhs_runtime_suspend(struct device *dev)
return 0;
}

+static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap,
+ unsigned reg)
+{
+ struct usbhs_omap_platform_data *pdata = omap->pdata;
+ int i;
+
+ for (i = 0; i < omap->nports; i++) {
+ switch (pdata->port_mode[i]) {
+ case OMAP_USBHS_PORT_MODE_UNUSED:
+ reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i);
+ break;
+ case OMAP_EHCI_PORT_MODE_PHY:
+ if (pdata->single_ulpi_bypass)
+ break;
+
+ if (i == 0)
+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+ else
+ reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
+ << (i-1));
+ break;
+ default:
+ if (pdata->single_ulpi_bypass)
+ break;
+
+ if (i == 0)
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+ else
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
+ << (i-1);
+ break;
+ }
+ }
+
+ if (pdata->single_ulpi_bypass) {
+ /* bypass ULPI only if none of the ports use PHY mode */
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+
+ for (i = 0; i < omap->nports; i++) {
+ if (is_ehci_phy_mode(pdata->port_mode[i])) {
+ reg &= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+ break;
+ }
+ }
+ }
+
+ return reg;
+}
+
+static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
+ unsigned reg)
+{
+ struct usbhs_omap_platform_data *pdata = omap->pdata;
+ int i;
+
+ for (i = 0; i < omap->nports; i++) {
+ /* Clear port mode fields for PHY mode */
+ reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i);
+
+ if (is_ehci_tll_mode(pdata->port_mode[i]) ||
+ (is_ohci_port(pdata->port_mode[i])))
+ reg |= OMAP4_P1_MODE_TLL << 2 * i;
+ else if (is_ehci_hsic_mode(pdata->port_mode[i]))
+ reg |= OMAP4_P1_MODE_HSIC << 2 * i;
+ }
+
+ return reg;
+}
+
static void omap_usbhs_init(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
@@ -389,55 +458,10 @@ static void omap_usbhs_init(struct device *dev)
reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;

- if (is_omap_usbhs_rev1(omap)) {
- if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
- reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
- if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
- reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
- if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
- reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
-
- /* Bypass the TLL module for PHY mode operation */
- if (pdata->single_ulpi_bypass) {
- dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
- if (is_ehci_phy_mode(pdata->port_mode[0]) ||
- is_ehci_phy_mode(pdata->port_mode[1]) ||
- is_ehci_phy_mode(pdata->port_mode[2]))
- reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
- else
- reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
- } else {
- dev_dbg(dev, "OMAP3 ES version > ES2.1\n");
- if (is_ehci_phy_mode(pdata->port_mode[0]))
- reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
- else
- reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
- if (is_ehci_phy_mode(pdata->port_mode[1]))
- reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
- else
- reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
- if (is_ehci_phy_mode(pdata->port_mode[2]))
- reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
- else
- reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
- }
- } else if (is_omap_usbhs_rev2(omap)) {
- /* Clear port mode fields for PHY mode*/
- reg &= ~OMAP4_P1_MODE_CLEAR;
- reg &= ~OMAP4_P2_MODE_CLEAR;
-
- if (is_ehci_tll_mode(pdata->port_mode[0]) ||
- (is_ohci_port(pdata->port_mode[0])))
- reg |= OMAP4_P1_MODE_TLL;
- else if (is_ehci_hsic_mode(pdata->port_mode[0]))
- reg |= OMAP4_P1_MODE_HSIC;
-
- if (is_ehci_tll_mode(pdata->port_mode[1]) ||
- (is_ohci_port(pdata->port_mode[1])))
- reg |= OMAP4_P2_MODE_TLL;
- else if (is_ehci_hsic_mode(pdata->port_mode[1]))
- reg |= OMAP4_P2_MODE_HSIC;
- }
+ if (is_omap_usbhs_rev1(omap))
+ reg = omap_usbhs_rev1_hostconfig(omap, reg);
+ else if (is_omap_usbhs_rev2(omap))
+ reg = omap_usbhs_rev2_hostconfig(omap, reg);

usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
--
1.7.4.1


\
 
 \ /
  Last update: 2013-01-17 15:21    [W:0.230 / U:0.924 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site