lkml.org 
[lkml]   [2013]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] ARM: tegra: config: enable SERIAL_TEGRA
On Wednesday 16 January 2013 11:27 PM, Stephen Warren wrote:
> On 01/16/2013 06:06 AM, Laxman Dewangan wrote:
>> Enable high speed serial driver for tegra platform.
> Thanks, I've applied patch 1 to Tegra's for-3.9/defconfig branch and
> patch 2 to Tegra's for-3.9/dt branch.
>
> Just as an FYI, the dt branch is merged into my for-next branch, and
> sent upstream, before the defconfig branch, so your patch order was
> reversed relative to that, but it's not an issue here.

Thanks for applying it. There is no issue on the reversing the sequence.


> Question: How do I test this; do I just fire up bluez(?) and point it at
> the UARTC serial port, or is there more to it?

I tested this in may pieces, not with the bluez.
I tested this in downstream with linux-next dma, this new serial driver,
some hacks in the board files with bluetooth.

Then I tested this again on linux-next with some hacks in board-dt filew
with invoking the driver from cardhu dts file. In this I tested driver
registration, basic write is wokring or not with some register
dump/interrupt, Not checked data integrity as not connected the serial
sniffer. The idea is that nothing should be crash in linux-next. The
basic driver code is already tested with bluetooth.






\
 
 \ /
  Last update: 2013-01-17 06:41    [W:0.084 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site