lkml.org 
[lkml]   [2013]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[ 014/171] ath9k_hw: Fix signal strength / channel noise reporting
Date
3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit b7c0c238898d200e80487516e2b67aba2a522cc0 upstream.

While AR_PHY_CCA_NOM_VAL_* does contain the expected internal noise floor
for a chip measured in clean air, it refers to the lowest expected reading.

Depending on the frequency, this measurement can vary by about 6db, thus
causing a higher reported channel noise and signal strength.

Factor in the 6db offset when converting internal noisefloor to channel noise.

This patch makes the reported values more accurate for all chips without
affecting NF calibration behavior.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/net/wireless/ath/ath9k/calib.c | 1 +
drivers/net/wireless/ath/ath9k/calib.h | 3 +++
2 files changed, 4 insertions(+)

--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -69,6 +69,7 @@ s16 ath9k_hw_getchan_noise(struct ath_hw

if (chan && chan->noisefloor) {
s8 delta = chan->noisefloor -
+ ATH9K_NF_CAL_NOISE_THRESH -
ath9k_hw_get_default_nf(ah, chan);
if (delta > 0)
noise += delta;
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -21,6 +21,9 @@

#define AR_PHY_CCA_FILTERWINDOW_LENGTH 5

+/* Internal noise floor can vary by about 6db depending on the frequency */
+#define ATH9K_NF_CAL_NOISE_THRESH 6
+
#define NUM_NF_READINGS 6
#define ATH9K_NF_CAL_HIST_MAX 5




\
 
 \ /
  Last update: 2013-01-16 01:21    [W:2.306 / U:3.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site