lkml.org 
[lkml]   [2013]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 1/2] pinctrl: tegra: add support for rcv-sel and drive type
Hi Linus W,


On Tuesday 08 January 2013 01:02 PM, Laxman Dewangan wrote:
> From: Pritesh Raithatha <praithatha@nvidia.com>
>
> NVIDIA's Tegra114 added two more configuration parameter in pinmux i.e.
> rcv-sel and drive type.
>
> rcv-sel: Select between High and Normal VIL/VIH receivers.
> RCVR_SEL=1: High VIL/VIH
> RCVR_SEL=0: Normal VIL/VIH
>
> drv_type: Ouptput drive type:
> 33-50 ohm driver: 0x1
> 66-100ohm driver: 0x0
>
> Add support of these parameters to be configure from DTS file.
>
> Tegra20 and Tegra30 does not support this configuration and hence initialize their
> pinmux structure with reg = -1.
>
> Originally written by Pritesh Raithatha.
> Changes by ldewangan:
> - remove drvtype_width as it is always 2.
> - Better describe the change.
>
> Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
> Reviewed-by: Stephen Warren <swarren@nvidia.com>
> ---

Can you please review the series and let us know if any thing I can do
for closing this?

Thanks,
Laxman





\
 
 \ /
  Last update: 2013-01-15 12:21    [W:0.095 / U:0.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site