lkml.org 
[lkml]   [2013]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V4 0/3] ARM: davinci: da850: add pinctrl support
Date
This set of patches adds:

* Add pinctrl-single for handling Padconf registers.
* Add NAND node to export NAND functionality on da850 EVM.
* Add NAND pinctrl node to do pin mux according to pinctrl-single driver.


This series applies on top of tag next-20130107 git tree
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
and the following patch

-drivers/pinctrl: grab default handles from device core
https://patchwork.kernel.org/patch/1862231/

This series is tested on da850 EVM.

Changes since V3:

-Move NAND related pinctrl DT data into the da850.dtsi file so it can
be reused.

Changes since V2:

-Move NAND pins configuration into the nand_cs3 DT node to avoid pins
configuration if it is not probed.

Changes since V1:

-Remove the binding documentation as already documented as part of
Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
-Enable PINCTRL Kconfig for MACH_DA8XX_DT platform only.
-Fix the pinctrl driver node unit-address.
-Make separate patch for da8xx_omapl_defconfig changes.

Kumar, Anil (3):
ARM: davinci: da850: add pinctrl driver DT entries
ARM: davinci: da8xx defconfig: enable pinctrl config option
ARM: davinci: da850: add NAND driver DT entries

arch/arm/boot/dts/da850-evm.dts | 8 ++++++
arch/arm/boot/dts/da850.dtsi | 40 ++++++++++++++++++++++++++++++++
arch/arm/configs/da8xx_omapl_defconfig | 1 +
arch/arm/mach-davinci/Kconfig | 1 +
4 files changed, 50 insertions(+), 0 deletions(-)

--
1.7.4.1



\
 
 \ /
  Last update: 2013-01-16 05:21    [W:0.040 / U:0.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site