lkml.org 
[lkml]   [2013]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH RFC] usb: dwc3: Remove dwc3 dependency on gadget.
On Fri, Jan 11, 2013 at 07:58:23PM +0530, Vivek Gautam wrote:
> Hi,
>
>
> On Fri, Jan 11, 2013 at 7:29 PM, Felipe Balbi <balbi@ti.com> wrote:
> > Hi,
> >
> > On Fri, Jan 11, 2013 at 07:13:55PM +0530, Vivek Gautam wrote:
> >> On Thu, Jan 10, 2013 at 6:32 PM, Felipe Balbi <balbi@ti.com> wrote:
> >> > Hi,
> >> >
> >> > On Mon, Dec 24, 2012 at 07:28:33PM +0530, Vivek Gautam wrote:
> >> >> DWC3 controller curretly depends on CONFIG_USB and CONFIG_USB_GADGET.
> >> >> Some hardware may like to use only host feature on dwc3.
> >> >> So, removing the dependency of USB_DWC3 on USB_GADGET
> >> >> and further modulating the dwc3 core to enable gadget features
> >> >> only with USB_GADGET.
> >> >>
> >> >> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> >> >> CC: Doug Anderson <dianders@chromium.org>
> >> >
> >> > right, right... Eventually we need to do it, but you're only making
> >> > gadget side optional. Host side should be optional too, but then you
> >> > need to make sure we don't build dwc3 without gadget and host.
> >> >
> >>
> >> Yes, true we need to make host side also optional, build dwc3 only when
> >> either of host or gadget are built.
> >
> > btw, make the default Dual-Role, if user/defconfig doesn't select
> > anything we want to build with all features.
> >
>
> Yes we can try something like this ?
>
> if (USB || USB_GADGET)

no need for this if, actually...

> menuconfig USB_DWC3
> tristate "DesignWare USB3 DRD Core Support"

make it a "depends on (USB || USB_GAGDGET)" here

other than that, it looks correct. Just make sure to compile test in all
options.

> if USB_DWC3
> choice
> default USB_DWC3_DUAL_ROLE_MODE
> ...
>
> config USB_DWC3_HOST_MODE

this one should depend on USB

> ...
>
> config USB_DWC3_DEVICE_MODE

this one should depend on USB_GADGET

> ...
>
> config USB_DWC3_DUAL_ROLE_MODE

should depend on USB && USB_GADGET

> >> >> int dwc3_gadget_init(struct dwc3 *dwc);
> >> >> void dwc3_gadget_exit(struct dwc3 *dwc);
> >> >> +#else
> >> >> +static inline int dwc3_gadget_init(struct dwc3 *dwc)
> >> >> +{ return -EINVAL; }
> >> >> +static inline void dwc3_gadget_exit(struct dwc3 *dwc)
> >> >> +{ }
> >> >> +#endif
> >> >>
> >> >> #endif /* __DRIVERS_USB_DWC3_CORE_H */
> >> >> diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
> >> >> index d4a30f1..553bbaa 100644
> >> >> --- a/drivers/usb/dwc3/debugfs.c
> >> >> +++ b/drivers/usb/dwc3/debugfs.c
> >> >> @@ -535,7 +535,8 @@ static ssize_t dwc3_testmode_write(struct file *file,
> >> >> testmode = 0;
> >> >>
> >> >> spin_lock_irqsave(&dwc->lock, flags);
> >> >> - dwc3_gadget_set_test_mode(dwc, testmode);
> >> >> + if (dwc3_gadget_set_test_mode(dwc, testmode))
> >> >> + dev_dbg(dwc->dev, "host: Invalid request\n");
> >> >> spin_unlock_irqrestore(&dwc->lock, flags);
> >> >>
> >> >> return count;
> >> >
> >> > wrong, if you don't have gadget mode, you just don't create this file.
> >> >
> >>
> >> dwc3-core makes call to dwc3_debugfs_init() invariably depending on DEBUG_FS.
> >> Will this not go ahead and create this file ?
> >> I think i am missing here something. :-(
> >
> > right, you can change dwc3_debugfs_init() to take into account the fact
> > that you're a gadget/drd or host-only.
> >
> > In case of host only, you stil want regdump to be available :-)
> >
>
> So in dwc3_debugfs_init() we shall actually create just 'regdump' file
> in case of host only mode, otherwise keep the dwc3_debugfs_init() happy
> with creating other files too.
> Right ?

right.

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-01-14 09:43    [W:0.055 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site